Advertisement
9) Install the OPT•24 into the ACC1 PCI slot by carefully aligning the card's gold-plated connector
edge to the PCI slot on the motherboard and pushing down gently but firmly until the card is fully
seated into the slot. It may help to gently rock the board front to back until the board is completely
seated.
Note: Make sure the loose connector ends are pointing up so they can be accessed for step 11.
9) Install OPT•24 Board
into the ACC1 PCI slot
10) Install the screw that you removed from the blank cover plate to secure the OPT•24 to the HDR chassis.
11) Connect the short ribbon cables from the OPT•24 card to the adjacent Sync card by folding them over the
top of the Sync card (see illustration below and on next page).
11) Connect the 2 short ribbon
cables to the Sync Card
10) Install Screw into
the OPT•24 bracket
REAR PANEL
REAR PANEL
2000
©
™
DESIGNS.
MACKIE
®
FRONT PANEL
REAR PANEL
REAR PANEL
2000
©
™
DESIGNS.
MACKIE
®
FRONT PANEL
Installation Guide
5
Advertisement
