Switch Matrix Section; Control Room Section - Mackie HUI Reference Manual

Switch Matrix Section

NOTE: The functions of some of these switches
depend on your particular DAW software. There-
fore, you may want to consult your DAW manual
for further details.
This section contains switches for global au-
tomation enabling, mode selection, group
creation, and more.
1
vide a number of special functions relating to
the operation of the HUI. Refer to the table on
page 31 in the "Specifications" section for de-
tails.
2
globally enable automation for FADER, MUTE,
PAN, SEND, PLUG IN, and SEND MUTE.
3
arm (or disable) automation on individual chan-
nels or channel groups. Options are READ,
TOUCH, LATCH, WRITE, TRIM, and OFF.
4
are used to query automation, monitor, and
group status, and to create and change groups.
They include AUTO, GROUP, MONITOR, CRE-
ATE, PHASE, and SUSPEND.
5
standard editing functions, including CAP-
TURE, SEPARATE, CUT, COPY, PASTE, and
DELETE.
PLUG IN
TIME CODE
12
HUI FEATURES AND CONTROLS
Function ("F") keys. These keys pro-
Auto Enable switches. These switches
Auto Mode switches. These switches
Status/Group switches. These switches
Edit switches. These switches perform
F1 F2 F3
AUTO ENABLE
FADER MUTE READ
PAN SEND LATCH
SEND MUTE TRIM
FEET
BEATS
6
Time Code Display and mode LEDs.
Shows current time location in either time
code, feet, or beats. LEDs indicate which mode
is being displayed. If no LED is lit, the display
is in standard minutes/seconds mode.
Note: Once communication is established be-
tween HUI and the DAW software, the decimal
point in the lower right corner of the Time Code
Display blinks (once per second). If incoming
MIDI communication is disrupted for any reason,
the Time Code Display will read "Off Line."
7
Rude Solo Light. A gentle reminder that
a channel (or channels) in your mix session is
soloed, whether it's part of the current bank of
eight channels or not.
8
Locate/Numerics keypad. Equivalent to
its computer keyboard counterpart.

Control Room Section

The features found in this parcel of real es-
tate (pictured on the next page) were included to
let you use HUI without having to dedicate a
mixer to monitoring functions. You can control
input and output sources, as well as master
volume, from this section. With the talkback
features you can slate takes or talk to the voice
talent, either with the in-panel talkback mic or
with an external mic plugged into HUI's back-
side. We're sure you'll find these features quite
useful in your daily DAW work. (See page 18
for more info.)
F4 F5
AUTO MODE STATUS/GROUP
TOUCH AUTO
WRITE MONITOR
OFF PHASE
RUDE
SOLO
LIGHT
F6 F7 F8/ESC
EDIT
GROUP CAPTURE SEPARATE
CREATE CUT COPY
SUSPEND PASTE DELETE
LOCATE/NUMERICS
=
*
/
CLR
-
7 8 9
+
4 5 6
1 2 3 E
N
T
.
E
R
0