Keep The Configuration File And Credentials In Sd Card - Bosch XDK110 Connection Manual

Connect XDK110 device to your Azure IoT services
4.5.2. Update wlan section
4.5.2.1. Update the value of ssid with SSID of the WiFi network to be connected to
4.5.2.2. Update the value of password with the password to the WiFi network
Please remember to keep the details within double quotes.
4.5.3. Save the file

4.6 Keep the configuration file and credentials in SD card

You need to provide the XDK with four files through SD card, before turning it on. As part of this step you need to copy the
following files to SD card and insert the card in to your device.
4.6.1. Copy the config.json(which was updated in the section 5) to SD card.
4.6.2. Copy the devCert.der(created at the end of step 2.5.) from the 'CACertificates/certs/' to SD card.
4.6.3. Copy the privKey.der(created at the end of step 2.6.) from the 'CACertificates/private/' to SD card.
4.6.4. Copy the rootCA.der from location 'AzurePlugAndPlay/resources/certificates/' to SD card.
Please keep in mind that rootCA.der file is common for all devices and is different from
only.root.ca.cert.pem'. The rootCA.der file is used to ensure that it is connecting to Azure endpoint itself.
4.6.5. Insert the SD card to your device.
Data subject not change without notice | Printed in Germany | December 2020
'azure-iot-test-
9 | 16
BCDS