BOSS ILLUMINATION ZETA Product Manual

ZETA
DOWNLIGHT
PRODUCT SPECIFICATIONS
Power : 10W
CCT Changeable : 3000K / 4000K / 5000K
Input Voltage : 240VAC
Ambient Temperature : -10 to 45°C
Dimming : Triac
90mm
PARTS INCLUDED
AU Plug Driver &
Luminaire
OPTIONAL COMPATIBLE PARTS sold separately
Brushed Black
Chrome Fascia
Fascia
WARRANTY STATEMENT This product is covered by a 3 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
44
IP
05.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
ADDITIONAL INFORMATION
1. This product comes with a switch at the back of the heatsink to
switch between different colour temperatures.
2. BIA recommends using an adaptive phase dimmer with this
product.
3. This product is suitable to be installed into 90mm downlight
canisters for concrete ceiling.
4. This product is suitable for outdoor under cover use.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting