Advertisement
a division of Romac Industries, Inc.
OPERATING MANUAL
AIR DRIVE
371-00
Thank you for your purchase of the Transmate Air Power Drive.
This drive will give you years of service if the instructions below are followed. Please read the accompanying Ingersoll
Rand Air Motor instructions for care and maintenance of the air motor. Clean air and proper motor lubrication are essen-
tial for longevity of the air motor. If you have any questions, please call us at 1-800-426-9341
PUBLISHED MARCH 2021
Advertisement
Table of Contents
Summary of Contents for Romac Transmate 371-00
- Page 1 Romac Industries, Inc. OPERATING MANUAL AIR DRIVE 371-00 Thank you for your purchase of the Transmate Air Power Drive. This drive will give you years of service if the instructions below are followed. Please read the accompanying Ingersoll Rand Air Motor instructions for care and maintenance of the air motor.
- Page 2 • Sand or dirt entering the air motor will destroy it. Make sure no sand or dirt enters this motor. • If the motor seizes up, do not attempt to disassemble or repair the Air Drive Motor yourself. Call Romac for assistance. Please follow this warning and read the manual. THE TRANSMATE AIR POWER DRIVE...
- Page 3 10 Air Tool Oil into the air motor then it run for ten minutes. This will help clean the water out of the Air Drive and lubricate all internal parts. If the Air Drive is left underwater not running or with an interrupted or shut off Air Supply for any length of time call Romac for assistance.
- Page 4 AIR DRIVE OPERATING MANUAL...
Need help?
Do you have a question about the Transmate 371-00 and is the answer not in the manual?
Questions and answers