Saxby Lighting 101345 Instruction Manual

Advertisement

Instruction manual
Dimmer Module 100W
101345
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Turn off all power supplying this equitment.
Use a voltage tester of appropriate rating.
Failure to follow these instructions will result in death or serious injury.
HAZARD OF FIRE
Failure to follow these instructions can result in death, serious injury, or equitment damage.

WIRING

1.This is a two-wire dimmer and service to be connected as shown in the diagram above
2.You can not connect more than one dimmer in parallel to operate the same charge from two points
www.saxbylighting.com
Thank you for purchasing this unit. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product. Please retain these instructions for future reference.
L1
L2
COM
Universal
DANGER
WARNING
Unit: mm
L1
L2
COM
Universal

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 101345 and is the answer not in the manual?

Questions and answers

Summary of Contents for Saxby Lighting 101345

  • Page 1 Instruction manual Dimmer Module 100W 101345 Thank you for purchasing this unit. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Unit: mm DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Turn off all power supplying this equitment.
  • Page 2 INSTALLATION 1. Switch off the mains supply before commencing the installation. 2. If removing the existing switch, disconnect the wiring from the switch terminals at the rear and take note of the present wiring of the switch and the marking on the terminals.

Table of Contents