Additional Indications; Responsibility; Copyright; Keeping The Manual - Electrolux TanGO SOLO ST User Manual

The data plate is located behind the waste drawer of the
equipment.
- N°
Volts V~ V 3N~
Amp A A
Water supply MPa Max
Steam pressure MPa Temperature
Water Pressure MPa. Water Pressure max
IMPORTANT
When installing the machine, make sure the
electrical connection is carried out in compliance
with that specified on the data plate.
NOTE!
Refer to the data given on the machine's data plate
for relations with the Manufacturer (e.g. when
ordering spare parts, etc.).
D.4

Additional indications

The drawings and diagrams given in the manual are not in
scale. They supplement the written information with an outline,
but are not intended to be a detailed representation of the
machine supplied.
The numerical values given on the appliance installation
diagrams refer to measurements in millimeters and/or inches.
E NORMAL USE
E.1 Characteristics of personnel enabled to
operate on the machine
The Customer is responsible for ensuring that persons
assigned to the various duties:
• read and understand the manual;
• receive adequate training and instruction for their duties in
order to perform them safely;
• receive specific training for correct machine use.
E.2 Characteristics of personnel trained for
normal machine use
The Customer must make sure the personnel for normal
machine use are adequately trained and skilled in their duties,
as well as ensuring their own safety and that of other persons.
14
Hz
W
°C
MPa
- N°
Volts V~ V 3N~ Hz
Amp A A W
Water supply MPa Max
Steam pressure MPa Temperature °C
Water Pressure MPa. Water Pressure max MPa
D.5

Responsibility

The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the original manufacturer
warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
The Manufacturer declines any liability for inaccuracies con-
tained in the manual, if due to printing or translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
D.6

Copyright

This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
ELECTROLUX.
D.7

Keeping the manual

The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
D.8

Recipients of the manual

This manual is intended for:
• the employer of machine users and the workplace manager
• operators for normal machine use
• specialised technicians - Customer Care service (see
service manual).
The Customer must make sure his personnel have understood
the instructions received and in particular those regarding work
hygiene and safety in use of the machine.
E.3 Operator qualified for normal machine
use
Must have at least:
• knowledge of the technology and specific experience in
operating the machine;
• adequate general basic education and technical knowledge
for reading and understanding the contents of the manual,
including correct interpretation of the drawings, signs and
pictograms;
• sufficient technical knowledge for safely performing his
duties as specified in the manual;