Content Foreword ........................2 Safety Guide ......................3 Packing List ......................4 Camera Structure ....................5 Specifications ......................7 Operation Instructions ..................8 Video Settings....................11 Photo Settings ....................14 System Settings ....................15 Remote Control Pairing ..................13 Remote control structure ........... 错误!未定义书签。 How to pair the camera with remote control watch错误!未定义书签。...
Your precious suggestions will help us shape our products to perfectly fit your standards. Please note that all items purchased from okejeye are covered by 1 year warranty from the date of purchase. If you encounter any problem during your use, please contact us at okejeye@sina.com...
1. It’s a high-precision product, do not drop or crash it. 2. Never make the products exposed to high temperatures and direct sunlight. 3. Use original batteries of okejeye to make sure the camera work/charge properly. 4. Please do not throw the device and the battery into the garbage directly, choose the specific place for its recycling.
Operation Instructions ⚫ Interface Selection: Interface display: ➢ Touch “setting icon” in the lower right corner of the interface display to enter video setting menu:...
Page 9
In the current interface, touch the “camera icon” to enter photo setting menu and touch the “setting icon” to enter general setting. ➢ Touch the “M icon” in the lower left corner of the initial interface display to enter six-square grid function. Movie: Touch to enter ordinary video mode.
Page 10
Slow Motion: Touch to enter slow motion mode, in this mode special effect video can be shot. That is, playback will be slow down. Slow motion video can only be recorded at the resolution of 720P 240fps. Photo: Touch to enter ordinary photo mode. Photo Burst: Touch to enter Photo Burst mode.
automatic shooting mode. Underwater: This mode attempts to adjust the camera's white balance to compensate for the loss of color underwater without the need for an artificial light source. For the most part, it works best in shallow depths where plenty of sunlight still exists in the water column.
Page 12
when the Micro SD card is full. (This mode is suggested to use in vehicle monitoring) Time-lapse Record: off, 0.5 second, 1 second, 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 minute. Note: this function will make video a fast forward effect video.
become dark even toward the sun. The image would not looks so clear if this function is ON sometimes. As a FPV cam, this function should be turned ON. Angle: Large/Medium/Small. Field of view of the video. Crop the edges of the video to avoid capturing the propellers.
Page 15
and day. ◆ Time: Touch the ‘+’ and ‘-’ keys to adjust the hour, minute and second. ◆ Touch the ‘+’ and ‘-’ keys to adjust the date/time representation method. Auto Power Off: Off, 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes.
Page 16
White Balance: Auto, Daylight, Cloudy, Tungsten, Fluorescent, Underwater. ISO: Auto, 100, 200, 400, 800, 1600, 3200 The term was carried over from film, when the ISO rating was known as the “film speed” and “ASA. ” Having a standard of sensitivity is important, as it allows you to shoot the same ISO on different cameras and trust that the exposure value will be equal.
Page 17
Screen Saver: Off, 30 seconds, 1minute, 5minutes. Car DVR:On/Off. Image Rotation: On/Off. Image will rotate 180 degrees(Only available in some resolutions). Anti-Shaking:On/Off. Format: All data will be deleted: Yes/No. Select “Yes” to format all the data of the Micro SD card. Note: Make a backup before formatting.
Version: Display the version number and help updating the software. Computer Connecting There are two options when you connect your camera to computer with the included TYPE-C 2.0 USB Cable: Mass Storage and PC Camera Mass Storage: Access to the files stored in the camera’s micro SD card to copy or view them on a computer.
Page 19
1. Download the app, please search: Apple Store: OKJ (for iOS) Google Play: YKJ (for Android) 2. Connecting to the Wi-Fi(Turn on Wi-Fi via 3 ways) 1)open Wi-Fi in setting. 2)Long press the M button on the top of camera...
Page 20
3)Swipe down the top of screen to show a drop-down menu 3. Check the Wi-Fi okejeye-xxxx in your phone (If there is not, please refresh your Wi-Fi interface to find it). Then enter the default password: 12345678.
Page 21
4. You can take photo, record video or check the playback in the app after connecting successfully.
Note: 1. The camera can only connected to one cellphone at a time. 2. The Wi-Fi connection is a little bit power consuming, so please avoid connecting Wi-Fi when the camera is low in battery Battery Charging Connect the USB Cable with a phone charger or computer. Use the 1A charger can reduce the time of charging.
1. If there is any problem, first of all, please reset all settings in default setting. (refer to: System Settings) 2. If the video quality is not satisfied, please reset all settings in default setting. (refer to: System Setup settings) 3.
Page 24
c.Frame rate prefer set to OFF. d.Turn Wi-Fi OFF. 5. The time of charging is too long: keep the camera in the state of power off during the process of charging or use the 5V 1A charger. 6. Video and audio are not synchronized: a.Use computer to play it.
Page 25
9. Camera no response: Take battery off and assemble again. GYRO Setting: It is an exclusive tool for improving anti shake function Please note: 1).Please open EIS in the menu before operating this tool 2).Please correcting GYRO after updating software. Please check the operation steps as below: Download link: http://ykjkj.net/Home/DownPage?url=http://static.ykjkj.net/Upload/File/20...
Page 26
1.Input Video file: Click Open video file:...
Page 27
Please note: the player will automatically load the gyroscope data file corresponding to the video The CSV file name is consistent with the video file name.
Warranty All okejeye products come with a limited warranty of 12 months from the date of purchase. And we have professional customer service team for your support as soon as we can. If you have any questions or confusions about our products or the warranty, please feel free to contact us.
Page 29
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the OK900 and is the answer not in the manual?
Questions and answers