Advertisement
Quick Links
Quick Start Guide
J Series by ATEL
4G LTE Outdoor CPE
Model: AOL-J912
4G LTE Bands 2/4/5/12/13/14/25/26/66
Version 2.0
About your J-Series CPE
The J-Series ODU (Outdoor Unit) is specially
designed to be installed outside (like on a roof) over
the pole or a wall. That helps ODU to receive better
4G-LTE signals and feed them into the home or
internal living space via an Ethernet cable using the
POE feature.
4
5
6
7
3
2
Figure 1. LEDs & Ports Location
1
Advertisement
Related Manuals for Atel J Series
Summary of Contents for Atel J Series
- Page 1 About your J-Series CPE Quick Start Guide J Series by ATEL The J-Series ODU (Outdoor Unit) is specially designed to be installed outside (like on a roof) over the pole or a wall. That helps ODU to receive better 4G-LTE signals and feed them into the home or internal living space via an Ethernet cable using the POE feature.
-
Page 2: Package Contents
Off indicates no SIM • Use only the provided accessories as mentioned above. signal. is detected. • If you find anything missing from Package contents as listed Table 1. Port & LED Definitions above, kindly contact ATEL at support@atel-usa.com. -
Page 3: Installation Kit
Installation Kit Mounting Bracket • • U-bolt Clamp Set Helps to affix the ODU with the mounting bracket to a pole. Towards Pole/Wall Towards ODU rear panel NOTE: Tools not included in the installation kit. PoE Injector + Power Cord •... - Page 4 Power ON your J-Series ODU Setting up your J-Series ODU Install the SIM Card & Connect the Ethernet Cable To turn on your device, you need to connect the • Ethernet cable coming from the ODU to the PoE Unscrew the covers from injector‘s P+D/OUT Port.
- Page 5 Installation of your J-Series ODU Attach the U-shaped side of the bracket to the pole Place the ODU outside and facing an open area towards an eNodeB/ Cell Tower. Obstructions such as concrete walls, using the provided U bolt clamps. glass partitions or wooden walls affect the transmission and reception of network signals.
- Page 6 To Mount on a Wall Affix/Align Mounting Brackets Unscrew the screws used to stack two mounting brackets Note: Wall Mount tools and installation together. This also helps the ODU CPE’s angle to be kit items are not included. adjusted horizontally or vertically depending upon wall #2 Phillips /pole side mounting bracket installation.
- Page 7 Online Device Management Portal Installation Completion You can access your ODU J-Series Online Portal to view Once the installation is complete and the ODU CPE is device status, change your device settings, and perform connected to your Computer/PC using the PoE injector. You manual software upgrades (for more details, kindly refer to can now access data services on that Computer/PC.
-
Page 8: Unable To Access Internet
Series ODU with our indoor WiFi AP (built-in POE). Make sure your SIM card is active and internet on the You can contact us to learn more about the ATEL Indoor WiFi 4G-LTE network is accessible/active. AP on our website, https://www.atel-usa.com/. - Page 9 Coverage subject to network availability. Limited Warranty: The full ATEL USA Warranty Policy can be found at www.atel- usa.com/warranty. On this page you can “Start a Warranty Claim”, “Check on an Existing Claim” and read our Warranty Policy by clicking on “ATEL’s Warranty Policy”.
Need help?
Do you have a question about the J Series and is the answer not in the manual?
Questions and answers