Page 1
Model: Daxys Head Light LOGO-TYPE LOGO-ICON (MAIN LOGO) Colour 1: Colour 2: Dash Blue Neutral Black RGB: 0,240,244 RGB: 51,51,51 HEX: #00F0F4 HEX: 333333 CMYK: 30,4,4,0 CMYK: 15,15,15,90 PMS: 311c PMS: Neutral Black C Daxys Head Light User Manual...
Page 2
Model: Daxys Head Light LOGO-TYPE LOGO-ICON (MAIN LOGO) *Please charge the product at the environmental temperature from 5 to 40 degrees Celsius; *Please check whether the charging line is good before charging; *When charging, please use the 5V USB power adapter;...
Model: Daxys Head Light 1. PACKAGE LIST LOGO-TYPE LOGO-ICON (MAIN LOGO) Bracket Colour 1: Colour 2: Dash Blue Neutral Black RGB: 0,240,244 RGB: 51,51,51 HEX: #00F0F4 HEX: 333333 CMYK: 30,4,4,0 CMYK: 15,15,15,90 PMS: 311c PMS: Neutral Black C V9M-1200 IPX6...
Page 4
Model: Daxys Head Light Slide the bottom of the light into the bracket. When you hear a “click” sound, the installation is complete. Please adjust the light angle. LOGO-TYPE LOGO-ICON (MAIN LOGO) Colour 1: Colour 2: Dash Blue Neutral Black...
Page 5
* Damages caused by improper shipping. HEX: #00F0F4 HEX: 333333 CMYK: 30,4,4,0 CMYK: 15,15,15,90 3. Daxys is irresponsible for any damages caused by the PMS: 311c PMS: Neutral Black C following improper uses. * Hidden safety factors or incidents caused by user's improper operation or other accidents.
Model: Daxys Head Light 3. CHARGING Open the rubber plug at the bottom of the headlight and insert the USB-C cable to connect to the charging device for charging. LOGO-TYPE LOGO-ICON (MAIN LOGO) Charging Status: Red indicator light flashes when charging, and blue indicator light is on after it is fully charged.
Page 7
Model: Daxys Head Light 1. Power On/Off: Long press the button for 0.75s. 2. Modes Change: Single click the button to change working modes (Ultra High 1200 lm - Daytime Flash - Breathe - Low LOGO-TYPE LOGO-ICON (MAIN LOGO) 100 lm - Medium 300 lm - High 600 lm - Cycle). The button indicator will be light for 5s when single press in Power Off status.
Page 8
Model: Daxys Head Light Circuit Protection: Overcharge protection/overdischarge protection / overcurrent protection / short circuit protection / high temperature protection / LOGO-TYPE LOGO-ICON false touch protection (MAIN LOGO) If the light gets hot and the inner components temperature of 65°C is detected, it switches to high brightness mode.