To Adjust Volume; Call Button - Cobra microTALK PR 260 WXC Owner's Manual

Operation
Intro
Channel Button
Channel Number
Secondary Icons
Listening
Volume Button
Volume Level

Call Button

4
Using Your Radio
Operation Customer
To Select a Channel
Assistance
With the radio on, select any of the
22 channels by pressing the Channel Up
or Channel Down button.
Channels 1 through 7 are shared with FRS/
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.
Notice
Listening for a Response
Release the Talk button to receive incoming
transmissions. Your microTALK
in Standby mode while the Talk
or Call buttons are not pressed.

To Adjust Volume

Press the Volume Up or Volume
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
Press and release the Call button.
The other person will hear a two second call
tone. This tone is used only to establish voice
communications.
Warranty
Both radios must be tuned to the
same channel to communicate.
See page 14 for FRS/GMRS frequency
allocations and compatibility charts.
See page 13 on how to select between
five call tone settings.
® radio is always
•
•
•
•