Subscribe to Our Youtube Channel
Related Manuals for EMA M-CX-EN-V1.5
Summary of Contents for EMA M-CX-EN-V1.5
- Page 1 M-CX-EN-V1.5 Capacitive proximity sensors can sense metals and non-metals, such as wood, ceramics, water, oil, and etc. They are mainly used to detect liquids, solids in funnels, storage tanks, and granaries.
- Page 2 Type & Dimension sensor...
- Page 3 Sensitivity...
- Page 4 Sensitivity Min. Max. Installation too tight S-Sensing range; D-Diameter of sensor. Maintenance In order to ensure the reliable operation for a long time, the following regular examinations should be performed: Check the attached wires and connecting parts if any looseness bad contact or wire disconnected exists.
- Page 5 M-CD-EN-V1.5 operating. ① wire mounting ② screws mounting...
- Page 6 Setting Steps: empty adjustment(Fig.1) full adjustment(Fig.2) PNP mode of connection When setting empty adjustment, keep the medium away sensing face over 20mm. During the calibration No object or interference source is behind the pipe. NPN mode of connection ＞20mm empty adjustment full adjustment （...
- Page 7 Default setting is under Unlock mode when power is ON. The user can calibrate empty adjustment and full adjustment directly. The user can also lock the product in manual if needed.
- Page 8 keep flashing slowly, than...
Need help?
Do you have a question about the M-CX-EN-V1.5 and is the answer not in the manual?
Questions and answers