R2 Contour Instructions

Contour 1000mm Combo Unit - Instructions
Please retain for future reference
Installation and Fitting Instructions

Before you start

Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current
device (RCD) is recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might slip.
Use a piece of masking tape to prevent the drill from wandering.
The unit and basin are secured to a suitably strong / reinforced wall to ensure stability. Fix in place following instructions on
page 2. If in any doubt please consult an expert.

Fitting Basin

Once the basin is plumbed in nish by securing to the washstand with a silicone sealant (not supplied) on all four edges.

Furniture Aftercare Instructions

As with all wooden furniture, this unit should be treated with care:
We recommend...
Wipe away any water splashes or
condensation after use. Excessive expo-
sure to water will deteriorate the furni-
WIPE AWAY
ture.
All bathrooms should be well ventilated
with a suitable extractor fan.
Clean with a soft damp cloth only.
For removal of lime scale deposits use a
suitable proprietary cleaner. If necessary
POLISH
test on an inconspicuous area rst.
Page 1 of 2
Please DO NOT...
Do not scrub or scour
CREAM
Do not use abrasive cleaning agents
CLEANER
BLEACH
CLEANER
05/18 .V1