Table of Contents
Advertisement
Troubleshooting
If...
Picture is too dark.
Camera does not
recognize
SD/MMC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.
46
Try one or more of the following
I
Turn on the flash (see
I
Move so there is no more than 11.5 ft (3.5 m) in wide angle and
6.6 ft (2.0 m) in telephoto between the camera and the subject.
I
Use Fill flash
(page
the subject.
I
Increase Exposure Compensation (see
I
Purchase a certified SD/MMC card.
I
Reformat the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Insert a card into the slot, then push to seat (see
I
Turn the camera off, then back on.
I
Make sure the camera is turned off before inserting or removing a
card.
I
Insert a new card (see
page
40), or delete pictures (see
I
Transfer pictures to the computer (see
or internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
page
8).
8) or change your position so light is not behind
(see page
30).
page
4), transfer pictures to the computer (see
page
(see page
30).
www.kodak.com/go/support
page
31).
page
4).
16).
page
40), then format the card
Advertisement
Table of Contents
