RAMM AirFiciency 60CFA UL507 Instructions

AirFiciency 60CFA UL507 Listed Ceiling Fan
Read instructions carefully before assembling or installing your fan.
It is important that you observe all safety information to help prevent personal
injury and/or property damage.
The retailer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of
purchase by the original purchaser. The retailer also warrants all other fan parts to be free from defects in workmanship and material at the time of shipment from the
factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option, replace with a
comparable or superior model if the product is returned to the retailer. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs
of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or affixing any accessories, is
not covered by this warranty. A certain amount of "wobble" is normal and should not be considered a defect. Service performed by unauthorized persons shall render the
warranty invalid. There is no other express warranty. This warranty does not apply to any damage that is the result of rust or corrosion. The retailer hereby disclaims any
and all warranties, including but not limited to, those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied
warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow limitation on how long an implied
warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for the incidental, consequential, or special damages arising out of or in
connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages,
so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and supersedes all prior warranties. Shipping costs for any return of
product as part of a claim on the warranty must be paid by the customer.
• Installation work and electrical wiring should be done by qualified persons only in accordance with all
applicable codes and standards.
• Unplug or disconnect the fan before servicing.
• Use this fan only in the manner intended by the manufacturer. This fan is intended for permanent installation
and to be used for air circulation only.
• The secondary support cable included with the fan must be properly connected.
• The fan shall be supported directly from the building structure. Caution: To reduce risk of injury, use only the
enclosed hardware as the primary means of support.
• Warning: To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
• Ceiling fans without guards are to be installed at least ten feet above the floor with adequate clearance
between blades and adjacent walls, furnishing, etc.
• When mounted in a cathedral ceiling, blade tips should be at least one foot from the angled roof line or air
turbulence may cause fan to sway.
• The supporting beam must be capable of holding at least 80 pounds (or the weight of the fan plus any
accessories that might be added).
• Ceiling fans installed with ceiling fan guards must be installed with J-hook mounting bolt hardware provided,
and must be attached directly to the building structure.
• Do not operate any fan with a damaged cord or plug. Discard fan or return fan to an authorized service facility
for examination and/or repair.
• All set screws must be checked and retightened where necessary after installation but before startup.
• All electrical hookups should be made by a qualified person.
• Check that power source conforms to electrical requirements of fan.
• Disconnect power at main service panel. Lock and tag it to prevent unexpected power application.
• Check state and local codes to assure proper hookup.
• The installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70, and local codes.
• Outlet for unit MUST be a GFCI protected receptacle.
Read and Save These Instructions
Warranty
Important Safety Instructions
Electrical Hookup