Related Manuals for logika WL-ZTPWBPB-E011-01
Summary of Contents for logika WL-ZTPWBPB-E011-01
- Page 1 Smart IR Transmitter (Side Emitted) WL-ZTPWBPB-E011-01 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Device Layout
Device Layout... -
Page 4: Specifications
Features • Communication Mode: IEEE 802.15.4 Zigbee. Allows smart control of appliances like TV/AC/Projector. • • Battery operated and easy to install. Supports time setting/linkage control/scene management. • Can be linked to smart assistants such as Amazon Alexa to allow voice control. •... -
Page 5: Installation Steps
Installation Steps Hardware Installation The device is designed for ceiling/wall mounting but can also be used free standing on a flat surface. 1) Drill two holes in the wall or ceiling, insert the wall plugs and screw in the mounting plate for the Smart IR Transmitter. - Page 6 Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
-
Page 7: Device Functions
Device Functions When the device is first powered on, it will normally automatically attempt to connect to the Zigbee Smart Home network. The System Indicator light will flash as it’s searching for the network. If it connects, the light will remain on for 2 seconds and then go out. If this does not happen, you can manually connect via the mobile app and follow the instructions below. - Page 8 User Guide It is assumed that you have successfully added the Smart IR Transmitter to the Smart Home Network, using the mobile app. 1) Select the Smart IR Transmitter from the device list in the app. 2) Click Add Remote Controller and select the type of device you wish to add. 3) Enter the name for this device (i.e.
-
Page 9: Troubleshooting
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!