Advertisement
Quick Links
Advertisement
Summary of Contents for Mould King 16039
- Page 1 Mould King16039 Quick Pitch Supplies...
- Page 2 Mould King 16039 Lighting Kits Installation Instruction Note: 1. The cable should be placed between or under bricks. 2. The cables should be set around the studs.(Shown as below) 3. Please pay attention to the direction of the wire socket: the side of the socket with exposed wires should face the welded "="...
- Page 3 Lighting kits installed in Step 207 Take out a warm light strip Start to paste the warm strip as shown in the red box below Warm light strip pasted as shown Cable arraged as shown...
- Page 4 Light kits installed in Step 288 Cover the bricks Cover the bricks Take out another warm light strip Start to paste the warm strip Warm light strip pasted as shown as shown in the red box below...
- Page 5 Cable arraged as shown Cable arraged as shown Cover the bricks Lighting kits installed in Step 435 Fix the socket on the bottom plate Take out a 350mm dual interface cable and a as shown warm light socket...
- Page 6 Pull out the cables Pull out the cables Take out a battery box and a six-port socket, link them Link the cables with the sockets Wrap the organized wires with tape...
- Page 7 Put the arranged cables and Installation complete Put the arranged cables and battery box here battery box here Have a Great Time!
Need help?
Do you have a question about the 16039 and is the answer not in the manual?
Questions and answers