Extinguishing The Flame - Le Feu 600 User Manual

7. EXTINGUISHING THE FLAME

• To extinguish the flame. Press the power button on the burner casing or remote control ONCE.
• When power button has been pressed, the pump will stop pumping fuel into the combustion tray.
• Green power button and arrows will be illuminated to confirm the burner is powered off.
• The remaining fuel in the combustion tray will burn. This may take a few minutes.
• Please do not try to extinguish the flame with other tools or utensils.
Please note: The burner is equipped with a 10-minutes safety feature: Power and arrow buttons
are flashing for 1 minute and you'll experience non-response until temperature reach safe level.
Once the burner is powered off, you must wait 10 minutes prior to restart.
8. ADJUSTING THE COMBUSTION TRAY HORIZONTALLY
To ensure even flames in the entire length of the burner, leveling is essential. Need for leveling the
combustion tray is clearly indicated, if uneven burning is experienced after 10 minutes of operation.
Please turn off the burner and allow it to cool down. Use a screw driver to tighten (lower) or loosen
(raise) the screw, to adjust the combustion tray. See illustration for reference.
Please contact your local dealer, if you have further questions regarding this.
NEVER ADJUST THE LEVEL OF THE COMBUSTION TRAY IF THE BURNER IS LIT OR STILL HOT.
9