Summary of Contents for MyBeerTap GFS-B6
- Page 1 Instruction Manual of GFS-B6 My Beer Tap For Video Set Up Guide Visit www.MyBeerTap.com Applied for canned beer in height 330ml 350ml and 500ml Insulation design Easy to clean after use Perfect for applying to the family gathering, hotels, bars, clubs.
- Page 2 Components ① Pull-push Rod ② Top cap ③ Main Body ④ Pedestal ⑤ Base ⑥ Beer output...
-
Page 3: How To Operate
How to Operate: 1. Take off the top cap from main body by anticlockwise turning. 2. Open the battery cover to fill two pieces AA battery and then close the cover by fixing the screw. - Page 4 3. Put the battery-filled top cap back to the main body by clockwise turning. It’s fixed when line marks on top cap and main body are in a line. 4. Take off the main body from pedestal by anticlockwise turning.
- Page 5 5. Open the canned beer and put it into the pedestal.
- Page 6 6. At last, put the main body back to pedestal by clockwise turning. It’s fixed when line marks on main body and main pedestal are in a line. 7. Put a cup on the base platform and enjoy the beer bubble by below function instructions: 1) Pull the pull-push rod, normal beer comes out;...
-
Page 7: Specifications
SPECIFICATIONS Power Source: 1.5V, 2pcs AA alkaline batteries ( not included ) Operating: Ultrasonic Vibration Exclusive product for use with canned beers ( 330ml/350ml/499ml). Material: ABS, Silicone Gel Working current: 260mA Maintenance 1. Take off the silicone gel tube from the main body for water cleaning if needed;...
Need help?
Do you have a question about the GFS-B6 and is the answer not in the manual?
Questions and answers