Advertisement

Read the manual before use and keep it for future reference.
Regardless of use, neither the manufacturer nor the retailer is responsible for violations of laws such as drink-driving.
The results are only indicative and do not serve as a criterion for the authorization of various activities.
Powered by 2x AAA alkaline batteries
For the most accurate measurement, we recommend performing the test 2-3 times within 3 minutes between each test.
Range: 0.00 - 0.19% BAC & 0.0-1.9 g / l
Perform the test at least 20 minutes after using alcohol.
Do not eat or smoke for 20 minutes before the test.

BATTERY PLACEMENT

Remove the battery cover.
Insert 2x AAA alkaline batteries.
Close the battery cover.

USE

Press the power button. The display lights up and an audible signal sound.
"Warm up" and a countdown from 10 to 0 are displayed. If the tester has not been operated for a long time, the sensor may be dirty,
switch off the device several times if necessary.
When the device is ready, "Blow" and a countdown from 10 to 00 are displayed.
23792-1 Alcohol tester W-TEC Spiriter
1.
LCD time display
2.
Value display
3.
Power button
4.
Mouthpiece
5.
Mode button
6.
Settings button
7.
Set button
8.
Battery location

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 23792-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for W-Tec 23792-1

  • Page 1 Range: 0.00 - 0.19% BAC & 0.0-1.9 g / l Perform the test at least 20 minutes after using alcohol. Do not eat or smoke for 20 minutes before the test. 23792-1 Alcohol tester W-TEC Spiriter LCD time display Value display...
  • Page 2 Take a deep breath and breathe continuously into the device for 3-5 seconds. The result is displayed: from 0.02 BAC (0.2 g / l) to 0.05% BAC (0.5 g / l) "Caution" appears on the display. From 0.05% BAC (0.5 g / l) "Danger" is displayed. After measuring the value and displaying the result, the tester automatically shuts off after 10 seconds.

Table of Contents