Page 1
EGT576-S STEP 1: Insert the foot caps into the foot of the desk leg and install “foot adjustment screws” STEP 3: Connect the upper leg metal base into the lower leg metal base and adjust according to the desired height.
Page 2
STEP 7: Assemble the back desk board frame. STEP 7: Assemble the back desk board frame. STEP 6: Align it into the front leg brace and screw to tighten. STEP 8: Align it at the back leg base and screw to tighten.
Page 3
EGT576-S STEP 9: Assemble the desk board. STEP 12: Align the desk board into the deskboard frame and screw it from the buttom to tighten. STEP 10: Align the LED lighting into the side of the desk board. STEP 11: Screw both ends to tighten.
Page 4
STEP 16: Connect all the RGB LED cables into the RGB control box. Connect the RGB control box usb connector into a desktop STEP 14: Place the mouse pad into the top of desk board. computer. STEP 15: Install the RGB LED control box, screw and tighten it.