Datalogic MX-E90 Quick Start Manual

MX-E90
Industrial Vision Processor
DESCRIPTION
This guide covers MX-E90 Industrial Vision Processor models. The MX-E90
series Industrial Vision Processors off er the most powerful and fl exible way to
solve even complex machine vision applications.
• Rugged IP20 housing
• Low Maintenance
• 16 Inputs and 16 Outputs
• Up to 8 GigE cameras
• Easily Accessed connectors
SYSTEM SPECIFICATIONS
Processor
Intel Core i7
Storage
32 GB RAM – 128 GB SSD
GigE camera ports
For MX-E90-8: 8 (all are PoE capable)
For MX-E90-4: 4 (all are PoE capable)
For MX-E90-2: 2 (all are PoE capable)
All MX-E90 Industrial Vision Processors have the following specifi cations:
• HD graphics (1920x1200)
• 2 x 10/100/1000 Mbps Base-T Network Interface
• Ethernet/IP, Modbus TCP, OPC, PROFINET communications supported
• 2 x RS232 Serial port
• 16 x Optically Isolated Digital In + 16 x Optically Isolated Digital Out,
confi gurable NPN (sink) or PNP (source) output type.
• Microsoft Windows 10 IoT Enterprise 2021 64-bit
GENERAL VIEW
1 Status lights and buttons 8 Chassis Grounding
2 LAN 1 9 Supply Voltage Connection
USB 2.0 Port for USB Hardware
3 LAN 2 10
Key
4 USB 3.0: x8 11 37-pin D-Sub Digital I/O
Camera connectors:
COM1 + COM 2 Cam 1-Cam 8 (MX-E90-8), Cam
5 12
2x RS-232 Serial port 1-Cam 4 (MX-E90-4),
Cam2 (MX-E90-2)
6 DVI for Monitor 13 Extra Digital Output Grounding
7 VGA 14 CFast card for extended storage
STATUS LEDS AND BUTTONS ( 1 )
COM2: RX2/TX2 for data transmission,
1 Power Button, Green 3
status monitoring.
COM1: TX1/RX1 for
2 data transmission, status 4 HDD LED status, Yellow
monitoring.
Power Button: Press and release to turn on the unit or shut down the OS and
switch off the unit. Press and hold to switch off without the OS shutdown.
SUPPLY VOLTAGE CONNECTION ( 9 )
Power Connector
+ 24VDC Supply Plus
- 24VDC Supply Minus
Chassis Grounding:
Connect to ground using a conductor with
minimum 2.5 mm² cross-section.
IMPORTANT NOTE: It is advised to use all 4 pins for power connection.
MECHANICAL DIMENSIONS
175
14 13
5
145 26
201
175
14 13
5
Cam1-
145
26
201
DIGITAL I/O SPECIFICATIONS
Pin Color Code Signal Name
1 Black Input 1
2 Brown Input 3
3 Red Input 5
4 Orange Input 7
5 Yellow Input 9
6 Green Input 11
7 Blue Input 13
8 Purple Input 15
- + + -
Common pin for external source or ground of Input
9 Gray
Power 24
S u p p l i e d 1 to Input 16
Power
PCOM0
NPN: common pin for connecting inductive loads of
10 White
O 1 to O 8
PNP: common pin for external voltage of O 1 to O 8
11 Pink Output 1
12 Light Green Output 3
13 Black/White Output 5
14 Brown/White Output 7
15 Red/White Output 9
16 Orange/White Output 11
17 Green/White Output 13
18 Blue/White Output 15
PCOM1
NPN: common pin for connecting inductive loads of
19 Purple/White
O 9 to O 16
PNP: common pin for external voltage of O9 to O 16
20 Red/Black Input 2
21 Orange/Black Input 4
22 Yellow/Black Input 6
23 Green/Black Input 8
24 Gray/Black Input 10
25 Pink/Black Input 12
26 Pink/Red Input 14
27 Pink/Blue Input 16
28 Pink/Green Isolated ground
29 Light Blue Isolated ground
30 Light Blue/Black Output 2
31 Light Blue/Red Output 4
32 Light Blue/Blue Output 6
33 Light Blue/Green Output 8
34 Gray/Red Output 10
35 Gray/Green Output 12
36 Purple/Black Output 14
37 Blue/Black Output 16
EXAMPLE I/O DIAGRAMS
External Internal
PC 5V
0
1
Protection
Circuit
S Vin Bi-direction
diode
ECOM
Figure 1 - Input connection
Figure 2 - Output connection (sinking)
Figure 3 - Output connection (sourcing)
O channels