Home Venus Smart Bulb Manual

SAFETY INFORMATION

To reduce the risk of injury and/or damage to this smart bulb, please read and follow all instructions and safety guidelines in this manual.

• 
  Risk of electric shock or burns. Switch Off the light switch controlling the smart bulb and wait for the smart bulb to cool down before touching.
• Keep out of reach of children.
• Only use indoors in dry areas. Keep away from water or other liquids.
• Do not install the smart bulb with wet hands or when standing on wet or damp surfaces.
• Only dim the smart bulb using the app. Do not use the smart bulb with dimmer switches, knobs, or other controls.
• Not for emergency lighting.
• Household use only.

PRODUCT INFORMATION

• Watt: 9W
• Flux: 900LM
• Voltage: AC110-130V
• Color Temperature: tunable white 2500-6500k
• Control mode: Hvs Smart app/Alexa/Google Assistant.

PRODUCT DESCRIPTION

• Designed for remote control using smartphone, tablet and the like
• Connection via Wi-Fi/Bluetooth. If the WI-Fl signal is too weak, reset your Wi-Fi router and try again. Bluetooth improves Wi-Fi network to give better experience.
• Compatible with IEEE 802.11 b/g/n (2.4GHz)
• Control the bulb via the Hvs Smart app.
• Apps work with Android and iOS.
• Continuous change in light color temperature from warm to cold white (2500-6500k).
• Dimming option in the range of 10-100%.
• Compatible with Amazon Alexa and Google Assistant.
• Additional features of the application:
  • scheduler to set the time of shutdown and on.
  • timer to set the shutdown time.
  • preset modes (reading, working, night, etc.).

QUICK START GUIDE

Installing

Ensure your Smart bulb is fitted properly.

Download App

Search and download "HVS Smart" in major application markets or scan the QR code below to download the App.

Registration/Login

If you do not have an app account, you may choose to register or log in by authentication code. The registration process is described in this section and the next.

Register.

Enter the verification code and create a password.

Add Device 1

Click "Add Device" or "+" at the top right corner of the App homepage to enter the "Add Device" page.

There are two ways to add device: Add Manually and Search Device.

Click "Add Device" or "+"

Choose "Lighting" "Lighting Source"from Add Device List

The initial setting requires selected to 2.4GHz Wi-Fi (EZ Mode), Bluetooth and Hotspot (AP Mode) also available to control lights directly after the setting completed.

Add Device 2

Set indicator light to rapid flashing.

Enter Wi-Fi password

Enter your Wi-Fi-network and password

The smart APP will connect your device

Switch

ON/OFF Press to power Smart Bulb

Color Mood

SCENES

Select curated color scenes based on your mood

TROUBLESHOOTING

Cannot connect to your Wi-Fi network.

Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are problems with your internet connection. If the WI-Fl signal ss too weak. reset your Wi-Fi router and try again. Bluetooth improves WiFi network to give better experience.

Setup is not working properly.

1. Close all apps that are running in the background then re-open the Hvs Smart app.
2. Uninstall and reinstall the Hvs Smart app then repeat the setup process.

Creating Group

1. Groups that have been created can be viewed on the "Home" page, and managed with hotkeys.
2. Open the group control panel as shown in 2.
3. Click "..." at the top right corner to configure or dismiss groups, as shown in Fig. 3.

Smart Features - Automation

Click "Add Smart" on the "Smart" page or "+" at the top right corner and select "Automation" to go to the smart configuration page, as shown in Fig. 3. Click "+" as shown in Fig. 3 to add multiple conditions or multiple actions.

Set Time Schedule

Set Smart Features-Automation-Schedule.

Can't Connect?

WE CAN HELP!

Email - service@routesun.com