TANNOY LIFE BUDS - Audiophile Wireless Earbuds Quick Start Guide

TANNOY LIFE BUDS - Audiophile Wireless Earbuds Quick Start Guide

Advertisement

TANNOY LIFE BUDS - Audiophile Wireless Earbuds Quick Start Guide

IMPORTANT SAFETY INFORMATION

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not throw this product in the fi re, to avoid explosion.
  8. Do not expose this product to bright sunshine for a long time.
  9. Do not disassemble or modify this product.
  10. Please store this product in a clean and dry environment.
  11. Charge it once a month (minimum).

  12. Choking and Swallowing Hazard. Keep the product safely out of reach of children and pets. The small size and the internal battery present a choking and swallowing hazard. Failure to follow instructions may lead to permanent damage or death.

  13. To prevent possible hearing damage, do not listen at high volume levels for long periods.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2018 All rights reserved.

Accessories List

  • LIFE BUDS x 1 pair
  • Charging Case
  • Charging Cable
  • This Quick Start Guide
  • Storage Bag
  • Caps of various sizes

FEATURES

Overview - Part 1
The charging case includes an internal battery that charges the LIFE BUDS when the lid is closed. They can be charged up to 3 times before the charging case has to be recharged. Connect the supplied charging cable to the rear connector on the case to recharge from a USB port. The front LEDs show the charging status of the LIFE BUDS inside.

Overview - Part 2
Bluetooth Version: 5.0. Enjoy a true high-defi nition stereo music experience!
Each LIFE BUD has a single multi-function button (MFB) control, a microphone, and an LED indicator. Various cap sizes allow you to choose the most comfortable fi t and fi nd the best sound quality.
Use both LIFE BUDS together, or as single units.

GETTING STARTED

Before use, please read this quick start guide carefully and keep it in a safe place.
Please fully charge the LIFE BUDS before use.
Please regularly charge the LIFE BUDS if you do not use them for a long time (more than 3 months). Please use the supplied charger cable.

General Operation

Auto Power on/off: Open/Close the lid, LIFE BUDS power on/off automatically.
Bluetooth Pairing: Pairing is Automatic.
Shutdown: Press the MFB button until the red LED is on.
Answer incoming call/Hang up: Press the MFB button.
Play music/Pause: Press the MFB button.
Next music track: Double press the Left MFB button.
Previous music track: Double press the Right MFB button.
Hearing Aid: Triple-press the MFB button to turn on/off hearing-aid.
Reject incoming Call: Press the MFB button to 'Call Rejected' voice and release.
Phone Transfer: Press the MFB button for 1 second and hear the sound 'BEEP', it will transfer the current call between LIFE BUDS and phone. (Do NOT press the MFB so quickly, or it will hang up)
Call Mute Mode: Double-press the MFB button to mute/unmute voice. Note: Only the Right LIFE BUD has the calling function when both LIFE BUDS are used.
LIFE BUDS Reset: Put the LIFE BUDS in the charging case, press LIFE BUD to charging status(red LED on), double-press the MFB button, LIFE BUD reset successfully after blue LED fl ashes 5 times, then do same for the other one.

LIFE BUD Charging

  1. The Red LED on the LIFE BUDS fl ashes when the power is low. Please charge the LIFE BUDs soon.
  2. Put the LIFE BUDS in the charging case, close the lid, and the LIFE BUDS will start charging (red LED on).
  3. The LIFE BUD LED will turn off automatically when it is fully charged.

Status LEDs

Charging Case LEDs

Blue LED on: Above 50% charged.
Red LED on: 25%-50% charged.
Red LED fl ash: Below 25% charged.
Note: If the charging case LEDs are not on when the LIFE BUDS are fi rst inserted, open the charging case lid and make sure the LIFE BUDS are in the correct position.

LIFE BUD LEDs

Red LED fl ashing: The battery charge is low.
Red LED on: Charging (when in the charging case).
Red LED on momentarily: Power turned off.
Blue LED fl ashing very slowly: The LIFE BUDS are working.
Blue and red LED fl ashing: LIFE BUDS pairing.

Using both LIFE BUDS

There are two methods to set up the LIFE BUDS, and each may be used:

Method one

  1. Make sure both LIFE BUDS are inside the case, and your phone or other device's Bluetooth is turned off.
  2. Open the lid and the LIFE BUDS will auto-power on and enter pairing mode.
  3. The left LIFE BUD will fl ash blue, and the right will fl ash blue and red and wait for the connection with your phone or device.
  4. Turn on the Bluetooth mode on your phone or device, and search for the LIFE BUD on the screen. Click and connect it. When connected successfully, the LEDs on both LIFE BUDS will fl ash blue slowly.

Method two

  1. Make sure both LIFE BUDS are inside the case, and your phone or other device's Bluetooth is turned off.
  2. Open the lid and take out the Right LIFE BUD. The LED will fl ash blue and red and wait for the connection with your phone or device.
  3. Turn on the Bluetooth mode on your phone or device, and search for the LIFE BUD on the screen. Click and connect it. When connected successfully, the LED will fl ash blue slowly. The fi rst LIFE BUD is connected.
  4. Take out the Left LIFE BUD. The LED will fl ash blue once, and it will be connected automatically.

Using a single LIFE BUD

  1. Make sure both LIFE BUDS are inside the case, and your phone or other device's Bluetooth is turned off.
  2. Open the lid and take out the Right LIFE BUD. The LED will fl ash blue and red. (If using the Left LIFE BUD instead, fi rst press MFB until the LED fl ashes blue and red.)
  3. Turn on the Bluetooth mode on your phone or device, and search for the LIFE BUD on the screen. Click and connect it. When connected successfully, the LED will fl ash blue slowly.

Troubleshooting tips

  1. If your phone cannot fi nd the LIFE BUDS, please check that the LIFE BUDs are on matching(blue and red LED fl ashing). If the LIFE BUDs are not matched for a long time, please turn on the LIFE BUDS to match again, or press around three seconds until LED fl ashes blue and red. Sometimes it is better to reset the LIFE BUDS and the Bluetooth function of the phone.
  2. If it is not possible to talk or listen to music while connected successfully: You might need to choose Bluetooth "Mobile Audio" or "Media Audio" when using an Android system, or please choose Bluetooth on call interface.
  3. If your phone or device is paired/connected with the LIFE BUDS but there is no sound: Try removing the LIFE BUDS as a Bluetooth device and then pair with your phone or device a second time.

Specifications

Bluetooth

Bluetooth version V 5.0
Wireless range 10 meters (with no obstacles)
Support model HSP / HFP / A2DP / AVRCP
Frequency Range 2402 to 2480 MHz
Channel No. 79
Max Output Power 10 dBm

LIFE BUDS Performance

Output 10 mW
Frequency Response 20 Hz to 20 kHz

Battery (LIFE BUDS)

Capacity 3.7 V/50 mAh
Charging time (approximately) 1 hour
Usage time (approximately)
Music playback 4 hours
Phone calls 4 hours
Standby 120 hours

Charging Case

Battery capacity 3.7 V/450 mAh
Charging time (approximately) 2 hours
LIFE BUD recharges 3 full charges
Power input Micro USB, 5 V / 1 A

Physical

Operating temperature -100C to 500C
Dimensions (charging case) 68.5 x 32 x 33.5 mm
(2.7 x 1.26 x 1.32")
Weight (including charging case) 43 g (0.09 lbs)

Other important information

  1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting tannoy.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and effi ciently. Also, read the terms and conditions of our warranty, if applicable.
  2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfi ller for your country listed under "Support" at tannoy.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at tannoy.com. Alternatively, please submit an online warranty claim at tannoy.com BEFORE returning the product.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street Las Vesgas, NV89118 USA
Phone Number: +1 702 800 8290

LIFE BUDS
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.


The Music Tribe is not responsible for any radio or TV interference caused by unauthorized modifi cations to this equipment.
Such modifi cations could void the user authority to operate the equipment FCC RF Radiation Exposure Statement:

  1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictri.be/warranty.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TANNOY LIFE BUDS - Audiophile Wireless Earbuds Quick Start Guide

Advertisement

Need help?

Need help?

Do you have a question about the LIFE BUDS and is the answer not in the manual?

Questions and answers

Table of Contents