Beta 9549ABW - Earbuds Manual
  1. Manuals
  2. Brands
  3. Beta Manuals
  4. Headphone
  5. 9549ABW
  6. User manual

Beta 9549ABW - Earbuds Manual

Advertisement

Table of Contents
Contents
Beta 9549ABW - Earbuds Manual


PURPOSE OF USE

  • The earbuds can be used for the following purposes:
    • playing audio via Bluetooth of smartphones, tablets, TVs and notebooks;
    • playing calls via mobile devices.

SAFETY DURING USE

caution
To avoid hearing damage, use your earbuds at a moderate volume level; do not listen to music loudly for extended periods of time.

caution
Do not use the earbuds while engaging in any activity requiring your attention and the ability to hear surrounding sounds – for example, while driving.

TECHNICAL DATA

Bluetooth version

RF transmission

Transmission range (Hz)

Transmission distance

Voltage

MIC sensitivity

Frequency (Hz)

Supported profiles

Standby time

Audio playback time

Talk time

SNR

V5.0

Class 2

2.402 GHz – 2.480 GHz

10 m

3.0V – 4.2V

42dB

20Hz – 20KHz

HFP, A2DP, AVRCP

120 h

4-5 h

4 h

>95dB

KEY

  1. Earbud LED
  2. Function button
  3. Charging case LED battery level indicators

USE

Powering on/off and charging the earbuds

To power on, remove the earbuds from the charging case. The earbud LED will slowly blink red and blue when powered on.

To power off, place the earbuds in the charging case. A red LED will glow solid when the earbuds battery starts charging.

Pairing the earbuds

The earbuds are automatically paired when removed from the charging case. The earbud LED will flash red and blue and the voice prompt "connected" will be heard when paired.

Pairing the earbuds with a Bluetooth device

When pairing the earbuds with a device (smartphone, tablet, TV or notebook), make sure that the Bluetooth function is enabled on your device.

From the Bluetooth menu of your device, select the earbuds' name, TG911, and connect the device to the earbuds.

The voice prompt "connected" will be heard when paired.

Note: If the earbuds are not paired to a Bluetooth device within 3 minutes after being removed from the charging case, they will automatically power off. In case the earbuds power off, place them in the charging case; then remove them.

Function button

  • Press the function button of either earbud for 5 seconds, to power both
  • If the earbuds are not pairing together, quickly double-press the function

When the earbuds are connected to the Bluetooth device

  • in audio playback mode: 2 segundos para rechazar la llamada entrant
    • press the function button to pause or play audio
    • on the left earbud, quickly double-press the function button to play the previous audio track
    • on the right earbud, quickly double-press the function button to play the next audio track
    • press 3 to enable Siri
  • in call mode:
    • on either earbud, press the function button to answer/end a phone call
    • on either earbud, press the function button longer than 2 seconds to decline an incoming call

Charging the case

Connect the USB cable supplied with the charging case to a standard adapter with a (max.) potential/current of 5.0V/1.5A and to a mains socket. Note: Using an adapter with different characteristics may damage the product.

The charging status is shown by the blue blinking LEDs on the charging case.

If all the LEDs glow solid blue, the battery is fully charged.

Note: when fully charged, do not leave the case connected to the mains socket for long periods.

BETA UTENSILI S.p. A.

Via Alessandro Volta, 18 - 20845 Sovico (MB) ITALY

Tel. +39 039.2077.1 - Fax +39 039.2010742 www.beta-tools.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Beta 9549ABW - Earbuds Manual

Advertisement

Need help?

Need help?

Do you have a question about the 9549ABW and is the answer not in the manual?

Questions and answers

Save Article as PDF

Table of Contents