Advertisement
SALUS RE600 is a product that is used as a booster to extend Zigbee devices communication range. It can be installed directly within a wall box or surface mounted onto the wall using the supplied wall bracket. This product must be used with the SALUS UGE600/UG600 (purchased separately). The SALUS UGE600/UG600 allows communication with other SALUS Smart Home products using the SALUS Smart Home App.
Description | LED |
Joining Network automatically | RED LED pulsing |
Joining Network trigger by button press | RED+GREEN LED turn on for 1 second, then RED LED pulsing |
Device with Network | RED LED |
Device without Network or loss link | RED LED pulsing |
Identify | GREEN LED flashing for up to 10 minutes |
To identify the device, short press the button.
To enter pair mode, press and hold the button for 3 seconds.
To do a factory reset, press and hold the button until LED flashes red (max 15 sec).
DISTRIBUTOR de SALUS CONTROLS: Sysclima.
Sistemas y Soluciones Climáticas.
Polígono La Serna Calle C, Nave 6.14 31500 - TUDELA - Navarra ESPAÑA
IMPORTER:
QL CONTROLS Sp. z o.o. Sp. k.
ul. Rolna 4, 43-262 Kobielice
PRODUCER:
Salus Limited
6/F, Building 20E, Phase 3, Hong Kong Science Park, 20 Science Park East Avenue, Shatin, New Territories, Hong Kong
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the RE600 that isn't answered in the manual? Leave your question here.