BC Master BC-T05 - True Wireless Earbuds Manual

Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S/M/L)
USB-A to C Cable
User Manual
Quick Start Guide
Warranty Card

Product Diagram

Specifications

Earbuds

Charging Case

Getting Started

Charging

Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB-A to C Cable. When all 3 LED charging indicator lights are white, the case is fully charged. Charging takes around 2.5 hours; and after being fully charged, the case can fully charge the earbuds 5 times. The earbuds should be stored in the case when not in use.

Note: Remove the protective film from the earbuds when using for the first time.

Turning On / Off

Pairing

Starting with the earbuds in the case:

1. Take the earbuds out of the case.
2. Turn on the pairing function on the device you want to pair with the earbuds
3. From the list of available devices, find and select "BC-T05"
4. If a code or PIN is required for pairing, enter "0000"

Regular Use After Pairing

Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Take the earbuds out of the charging case, and they will turn on and connect with each other automatically
• To power off, put the earbuds back in the charging case, and they will begin charging

Using the Left/Right Earbud Only

Starting with the earbuds in the case:

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select "BC-T05"

Notes

• When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found
• To clear the pairing list, touch and hold the touch-sensitive panels on both earbuds for 10 seconds when they are in the changing case
• In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired
• If one of the earbuds has no sound output, put both earbuds back in the charging case and take them out again
• The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 2 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps

Controls & LED Indicators

Streaming Audio

Once paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.

Answering Calls

LED Indicators

Note: the color of LED indicator varies when the the color of earbuds change.

FAQ

The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.

I've connected the earbuds with my smartphone but can't hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the audio can be transmitted. If you're using a music player or other device, please make sure it supports the A2DP profile.

The sound isn't very clear or the caller can't hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range-related issues.

What's the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.

The earbuds won't turn on
Try charging the earbuds for a while. If the earbuds still won't power on, please contact our support team at the email address given in Warranty & Customer Support.

I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.

Product Care & Use

• Keep away from liquids and extreme heat
• Don't use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss

Model: BC-T05

www.bc-master.com | support@bc-master.com
Dongguan Xingji Electronics Co.,Ltd
First Building of Huaxin Industrial Park Luxi Village Gaobu,
Dongguan, Guangdong 523000 CN
FCC ID: 2AW44-BCT05