Canyon BK-10 - Ultra-slim Wireless Keyboard Manual

Table of Contents

Contents

1 Package Contents
2 Installing the keyboard batteries
3 Multimedia hot keys
4 Features
5 Bluetooth Pairing: Mac / iPhone / iPad
6 Use the FN key
7 SAFETY INSTRUCTIONS
8 Troubleshooting
- 8.1 The keyboard does not work properly
- 8.2 Keyboard doesn`t work
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Package Contents

Installing the keyboard batteries

Multimedia hot keys

Features

Ultra slim design
Mac OS layout
Connection: BT 5.1
Working distance up to 10 m (open space)
Keys: "Scissor" type membrane
Number of keys: 104/105
15 mutimedia functions
Auto power saving mode
2 AAA batteries included

Package contents

Connection

Keyboard

Batteries 2 pcs,

AAА type

User manual

Open the battery compartment. Insert AAА batteries into the keyboard. Led indicator will alert if the battery is low.

Bluetooth Pairing: Mac / iPhone / iPad

Install two AAA batteries and press FN and C keyboards keys simultaneously for 1-2 seconds until you see that the LED light is flashing blue.
Make sure the Bluetooth is turned on at your Mac / iPhone / iPad
The keyboard should be detected as "BK-10" Please select it and press to connect. The keyboard will be ready for use.

Use the FN key

FN+ESC+F1-F15 can perform the same function as downlink identification function (both for shortcut or function key modes)

Shortcut Keys
	Brightness change in Mac build-in displayk	Volume Down
	Cut (Cmd-X)	Volume Up
	Copy (Cmd-C)	Eject
	Paste (Cmd-V)	Print (Cmd-P)
	Previous Track (Cmd-Left Arrow)	Zoom Out (Cmd- (minus))
	Play/Pause (Spacebar)	Zoom In (Cmd=(equal))
	Next track (Cmd-Right Arrow)	Rectangular screen area capture (Cmd-Shift-4)
	Mute

SAFETY INSTRUCTIONS

warning Read carefully and follow all instructions before using this product.

Do not expose the keyboard to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
Do not expose the keyboard to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
The product shall be connected to the power supply source of the type indicated in the operation manual only.
Never spray liquid detergents. Use only dry clothes for device cleaning.

It is forbidden to dismantle the device. Attempt to repair this device is not recommended and leads to cancellation of the warranty.

Troubleshooting

Problem	Solution
The keyboard does not work properly	It is possible that one of the keys is "fused". Keypad faults can be caused by a technological defect in the keyboard, as well as a from debris or water in the keyboard. It`s not recommended to perform self-cleaning of the keyboard.
Keyboard doesn`t work	Low battery power. To test, insert new batteries of the specified type.

If the actions from the above list do not contribute to problem solving, please contact the support team at Canyon: http://canyon.eu/ask-your-question