SCX Design O30.30L Instruction Manual

ENGLISH - Instruction Manual
SCX Design® 5W Wireless Charging LED Desk Lamp
Reference O30.30L/32501
Please read this intruction manual carefully before using the product.
Product specifications
· Materials: ABS + aluminium
· Input (max): 5V/3A
· Wireless output: 5W
· USB output: 5V/1A
Main functions
–
MIN
Indicators on the base
1. Switching on and wireless charging
Connect the lamp using the supplied power cable. Press the power button
to turn on the lamp. The surface in the middle of the base is a 5W
wireless charging base. If your smartphone is compatible with induction
technology, place it horizontally on the base and your smartphone screen
will light up.
2. Light adjustment
You can adjust the brightness as well as the shade of the light using the
various touch indicators. Slide your finger to the right to increase the
brightness, to the left to decrease it.
To change the shade, press the M symbol to select the desired shade.
Warning!
- Do not place this product on a slippery surface.
- Do not use this product near a heat source or in a humid environment.
- Keep the product out of the reach of children.
- Do not try to disassemble or repair the product.
- LEDs are not replaceable.
FCC Compliance Statements :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
· Lamp power (Max 4W, 5V/0.8A)
· Brightness: 250 Lumen
· LED: 52 LEDs SMD2835
· Includes a Type-C charging cable
Brightness adjustment
+
MAX
Power button
Choice of light shade
Caution : Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Never Store or use this product in temperatures below 32°F (0°C) or
above 115°F (45°C).
44 rue de la Jonquière
SCX Design® 5W Wireless Charging LED Desk Lamp
Référence O30.30L/32501
Avant toute utilisation du produit, veuillez lire le manuel d'instruction.
Spécifications du produit
· Matières : ABS + aluminium · Puissance de la lampe (Max 4W, 5V/0.8A)
· Entrée (max): 5V/3A · Luminosité : 250 Lumen
· LED : 52 LEDs SMD2835
· Sortie sans fil : 5 W
· Sortie USB: 5 V/1 A · Comprend un câble de chargement Type-C
Fonctions principales
–
MIN
Indicateurs sur la base
1. Mise en marche et chargement sans fil
Branchez la lampe à l'aide du câble d'alimentation fourni. Pour allumer ou
éteindre la lampe, appuyez sur le bouton de mise en marche. La surface au
milieu du socle est une base de chargement à induction 5W. Si votre
smartphone est compatible avec la technologie induction, posez le de façon
horizontale sur la base, l'écran de votre smartphone s'illuminera alors.
Ajustement de la luminosité
+
MAX
Bouton de mise en marche
Choix de la teinte de lumière