INDEX Important Safeguards Product Feature Components and Installation Assembly Diagram Strainer and Metal Funnel Before The First Use Make Espresso Make Cappuccino/Frothed Milk Automatic Power off Function Customize and Factory Reset Cleaning and Maintenance Cleaning Mineral Deposits Trouble Shooting Warning...
Important Safeguards Before using the electrical appliance, the following basic precautions should always be followed including the following: 01. Read all instructions. 02. Before using check that the voltage of wall outlet corresponds to rated voltage marked on the rating plate.
Assembly Diagram Strainer and Metal Funnel 1.Align the notch on the "Single-cup/double-cup strainer" with the notch on the "Metal funnel" and pit it axially. 2.Rotate the "Single-cup/double-cup strainer" to stick the bump into the "Metal funnel". Before The First Use To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as follows: 1.
Make Espresso Step 1: Press and hold the "power button" for three seconds to turn on the machine. The button flashes to indicate that it is preheating. At this time, place the coffee cup on the top of the machine. Step 2: Remove funnel by turning it clockwise.
Step 5: Insert frothing nozzle into the milk about two centimeter, froth milk in the way of moving vessel round up and down. Step 6: When the required result is reached, turn steam control knob to "OFF" position.(Note: Clean steam outlet with wet sponge immediately after steam stops producing, but care not to hurt!) Step 7: Pour the frothed milk into the espresso prepared, now the cappuccino is ready.
Cleaning and Maintenance 1.Turn off coffee maker and let the coffee maker cool down completely before cleaning. 2.Clean housing of coffee maker with moisture-proof sponge often and clean water tank and drip tray regularly then dry them.(Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.) 3.Detach metal funnel by turning it clockwise, get rid of coffee residue inside, then clean it with cleanser, but at last rinse with clear water.
Trouble Shooting Do not take apart the appliance by yourself if the cause of failure is not found, you had better contact the qualified servicing center. Environment friendly disposal You can help protect the environment! Please remember to respect the local regulations: handinthenon-working electrical equipment to an appropriate waste disposal center.
Need help?
Do you have a question about the CM5403F and is the answer not in the manual?
Questions and answers