5) Unlock the button
by turning the key
counterclockwise
6) Install the button in
standby
state
by
turning
the
key
clockwise.
Take out the key!
7) Check functionality
(see p. 8).
7 WIRING
Perform
wiring
to
detector`s
accordance with control panel operating manual.
NC and COM - normally closed relay contacts;
NO and COM - normally open relay contacts.
8 OPERABILITY TEST
1)
Press the button.
The button must stay
closed
in
pressed position.
2)
Check the alarm
notification
control panel.
3)
Unlock the but-
ton by turning the
key
counterclock-
wise
4) Return the but-
ton to standby status
terminals
in
by turning the key
clockwise.
Take out the key.
the
on the
9 WARRANTY
The operation warranty period is 2 years from the date
of operation start-up but no longer than 2 years 6
months from the date of manufacturing
requirements of the User guide.
subject to the