Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Metalcraft Manuals
  4. Outdoor Furnishing
  5. GR-102
  6. Mounting and user instructions

Metalcraft GR-102 Mounting And User Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Mounting and User Instructions
for GR-102 pergola
Size:300x300 cm
Content
Tools and man force ............................................................................2
Parts List..............................................................................................3-4
Product Description..............................................................................4
Safety Instruction..................................................................................4
Mounting................................................................................................4-16
Discounting............................................................................................17
Storage..................................................................................................17
Disposal.................................................................................................17
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the GR-102 and is the answer not in the manual?

Questions and answers

Summary of Contents for Metalcraft GR-102

  • Page 1: Table Of Contents

    Mounting and User Instructions for GR-102 pergola Size:300x300 cm Content Tools and man force ................2 Parts List....................3-4 Product Description................4 Safety Instruction..................4 Mounting....................4-16 Discounting....................17 Storage....................17 Disposal....................17...

  • Page 2: Tools And Man Force

    Keep this manual for future reference. Dear Customer, congratulations and thank you for buying an Pergola out of GR-102 pergola . To enjoy this product for a long time and for your own and the safety of other people please obey the mounting instructions.

  • Page 3: Parts List

    Parts List Please check all parts against the parts list before commencing construction of pergola. Hardware and other parts: ○ ○ ,1M8x20 countersunk screw ,2Strengthen pivot pin ○ ○ ,3Base plate ,4Upright cover ○ ○ ,5M10 screw cap ,6M8x20 Hexagon bolt ○...

  • Page 4: Product Description

    Aluminum profile parts list: ○ ○ ,ABeam with slots ,BBeam with motor direction & slots ○ ○ ,CBeam ,D1Post + post connector ○ ○ ,D2Post + post connector ,D3Post + post connector ○ ○ ,EGutter ,FGutter ○ ○ ,GCommon louver ,HCentre louver ○...
  • Page 5 A minimum of three healthy adults are required to move and install the pergola as the product is big and heavy. Do not try to install the pergola alone. If the pergola falls, it could cause serious injuries and damages! Contact an authorized assembler for help.
  • Page 6 Step 1 ○ ○ ○ Attach base plate ,3x4 to the bottom of posts ( ,D1x1, ,D2 x2and ○ ○ ,D3x1),use bolts ,1x8 to attach with hex key or electric drill ○ ,D2 posts should be installed diagonally as below...
  • Page 7 Step 2 ○ ○ ○ Attach beam ,Bx1 and beam ,Cx2,use bolts ,6 to fasten...
  • Page 8 Step 3 ○ ○ Attach beam ,Cx1, use bolts ,6x12 to fasten...
  • Page 9 Step 4 ○ ○ Attach upright cover ,4x4,use bolts ,6x8 to fasten...
  • Page 10 Step 5 ○ ○ ○ Attach all four gutters ( ,Ex2 and ,Fx2 )by hooking inside the ○ ○ ,Cbeams...
  • Page 11 Step 6 ○ ○ ○ Fasten motor ,9x1,motor parts ,10x1 and motor mount ,11 x1 as ○ ○ diagram below and confirm ,13 and ,11 joining well.
  • Page 12 Step 7 ○ ○ Located holes in centre of beams( ,A and ○ Place centre louver ,Hinto eleventh slot, lining up with the holes. ○ Using M10 nut ,5X2, secure the louver in place ○ ○ Place Driving louver ,Iin line with fifth slot on the beam ,A and ○...
  • Page 13 Step 8 Join the female and male plugs for led lighting (AC220V to AC220v) and motors(DC24V to DC24V) and wire to power plug accordingly.
  • Page 14 Step 9 ○ Locate control rod ,Jx 2 (Flat L shape aluminum bar).One is required for each end of the louvers. ○ ○ ○ Using bolt ,6,plastic spacer ,7and nut ,8,secure the louvers at each end. Note: Do not over tighten. Over tightening will prevent louvers from moving.
  • Page 15 Step 10 ○ Mark holes for expansion bolts ,12x4 per post. Note: Drill size required is 12mm. Insert bolts. Use a hammer drill if required. Place posts over bolts. Tight nuts WARNING: Ensure louvers are open during periods of mild to strong winds.
  • Page 16 Motor setup...

  • Page 17: Mounting

    Dismounting When you don’t want to use the Pergola anymore or if you want to dispose it one day you have to demount Attention! At least two healthy adults are need for this step.  Keep the Pergola louvers open before you begin with dismounting.