Page 1
Click Power Button 3 times, the Ace will power on and begin to heat up under the default settings or your last setting temperature. Click the Power Button 3 times to turn off, and the XMAX Ace will vibrates to indicate off.
Page 2
3.ENJOY XMAX ACE While heating, the OLED display temperature will goes up. The device vibration indicates readiness and the timer countdown starts. Inhale through the mouthpiece and enjoy. This device will automatically begin vaping that removes the need for power/push button vape.
Page 3
5.BOOST MODE Press the Power Button twice to enter boost mode, the device temperature will goes up to 255°C(491°F) directly with real quick, press the Power Button twice to exist boost mode. 6.TIMER SWITCHOVER The Ace has 2 session timers, 5 minutes and 10 minutes. lb switchover the 5 minutes and 10 minutes, just hold the Power Button and UP Button at the same time for 3 seconds..
Page 4
7.FAHRENHEIT AND CELSIUS SWITCHOVER lb switchover to Fahrenheit, just hold the Power Button and Down Button at the same time for 3 seconds. 8.OLED DISPLAY...
Page 5
9.CHARGING 10.CERAMIC OVEN CLEANING Slide the cleaning button to push the material out. Use brush and alcohol cotton swab to sweep inside of oven. *Tip: Perform a burnoff cycle at max temp for 2 minutes after cleaning.
Page 6
11.MOUTHPIECE & FILTER CLEANING Use brush to clean the mouthpiece tip. Take off the silicon holder; then you can clean the ceramic filter and mesh screen, please wipe and clean with alcohol wipes and cotton swabs. Take off the mouthpiece tip, and replace with a new o-ring..
Page 7
Canatura - Online store with the best hemp products for your health www.canatura.com/en Copyright reserved...
Need help?
Do you have a question about the XMAX ACE and is the answer not in the manual?
Questions and answers