Getting Started; Assembling The Headset - Teufel ZOLA Technical Description And User Manual

3. Getting started

3.1 Assembling the Headset

Insert the top side of
the cushion flap into
the headphone gap so
that the Teufel logos are
aligned.
To remove the cushion, hold the headset firmly and pull the cushion off at an angle.
Grip the already
inserted top part
of the cushion
while stretching
and inserting the
bottom parts.
1
Insert the plug with
triangle on top in
alignment with the
mark on the cup.
Keep alignment of
both markings.
Rotate the headset and
insert the remaining
parts.
2
Insert until it is fully
attached.
• ZOLA Gaming Headset
Gently shuffle the
cushion so that all
parts fall in place.
90°
3
Rotate the plug 90°
clockwise until the
line marking of the
plug is aligned with
marking at the cup.
The plug is now
fixated.
9