Xentino SR2 Series User Manual
  1. Manuals
  2. Brands
  3. Xentino Manuals
  4. Network Router
  5. SR2 Series
  6. User manual

Xentino SR2 Series User Manual

2w/4w/8w g.shdsl bis efm router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Version V.0.7
Models :
SR210 / SR220 / SR240

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR2 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Xentino SR2 Series

Summary of Contents for Xentino SR2 Series

  • Page 1 USER MANUAL Version V.0.7 Models : SR210 / SR220 / SR240...
  • Page 2 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 3: Table Of Contents

    4.3.6 LAN ......................33 4.3.7 QoS......................35 4.3.7.1 General ............................35 4.3.7.2 PCP ............................. 36 4.3.7.3 DSCP ............................36 4.3.7.4 Port ............................. 37 4.3.7.5 Remark ............................38 4.3.7.6 Traffic Classify ..........................39 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 4 Configuration via Serial Console or Telnet ............63 Introduction ....................63 6.1.1 Serial Console .................... 63 6.1.2 Telnet ......................63 Main menu ..................... 64 Key CLI Command tree overview ..............65 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 5: Descriptions

    SHDSL.bis: ITU-T G.991.2 (2004) Annex A/B/F/G supported  Support EFM Bonding and SHDSL M-Pair mode  Encoding scheme: TC-PAM 16/32/64/128  Data Rate: N x 64 Kbps (N=3~89) using TC-PAM 16/32 Max. 5.696Mbps (1-Pair) SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 6 Support of OAMPDU information and functionality ( ITU-T Y.1731)  OAMPDU Event Notification, Variable Request, Variable Response, Loopback Control  VLAN base QOS (802.1P/Q), Priority Queue Network Protocol  VoIP(SIP) pass-through  IPv4 (ARP/RARP, TCP/UDCP, ICMP) SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 7 Physical / Electrical  Dimensions: 18.7 x 3.3 x 14.5cm (WxHxD)  Power: 100~240VAC (via power adapter)  Power Consumption: 9 watts Max  Operating Temperature: 0~45°C  Storage Temperature: -20°C~70°C SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 8: 2-Wire G.shdsl.bis Efm Router With 4 Lan Port

    2-Wire G.Shdsl.bis EFM Router with 4 LAN Port SR210 4-Wire G.Shdsl.bis EFM Router with 4 LAN Ports SR220 8-Wire G.Shdsl.bis EFM Router with 4 LAN Ports SR240 Applications Combination with EFM or ATM DSLAM SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 9: Getting To Know About The Router

    Transmit or received data over SHDSL.bis link 4 SHDSL.bis line 4 handshake/Training State (500ms on, 500ms LINK 4 Slow Blink off) SHDSL.bis line 4 connection isn’t established LINK/ACT1 Ethernet cable is connected to LAN 1 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 10: Rear Panel

    Internet and you want to configure it again by clearing all configurations, press the Reset Button for 4 seconds with a paper clip or sharp pencil. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 11: Shdsl.bis Line Connector

    Console Cable Below figure show the cosole cable pins asignment: Pin Number Description Figure No connection RxD (O) TxD (I) No connection No connection CTS (O) RTS (I) No connection SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 12: Install The Router

    Users need to know the Internet Protocol supplied by your Service Provider and determine the mode of setting. Protocol Selection RFC1483 Ethernet over ATM RFC1577 Classical Internet Protocol over ATM RFC2364 Point-to-Point Protocol over ATM RFC2516 Point-to-Point Protocol over Ethernet SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 13 Gateway: IP Address: Host Name:(if applicable) Subnet Mask: Gateway: DNS Server: Host Name:(if applicable) PPPoE VPI: VCI: Encapsulation: User Name: Password: DNS Server: Host Name:(if applicable) IP Address:(if applicable) SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 14: Install The Shdsl.bis Router

    Connect the power adapter to power source inlet.  Turn on the PC or NB, which is used for configuration the Router. SHDSL.bis 4-ports router with complex network topology SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 15: Configuration Via Web Browser

    Note: After changing the User Name and Password, strongly recommend you to save them because another time when you login, the User Name and Password have to be used the new one you changed. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 16 URL Filter  IGMP  SNTP  Switch  ADMIN  SYSTEM  USER  MGMT  UTILITY  SYSTEM LOG  SYSTEM TOOL  UPGRADE  RESTART  LOGOUT SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 17: Basic Setup

    After completing it successfully, you can access Internet or use a pair of Shdsl.bis Routers as LAN extenders. This is the easiest and quickest way to setup the router. Click BASIC for basic installation. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 18 Click on the drop-down list and select Encapsulation used by your ISP as PPPoE or RFC1483 WAN-IP Item Description IP Address Type Click on the drop-down list and select IP Address Type as Static or Dynamic SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 19 Enter User Name provided by the ISP for PPPoE Password Enter Password provided by the ISP for PPPoE Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 20: Reference Diagram

    LAN. Bridged connections do not use the IP protocol. EoA can also be configured to provide a routed connection with the ISP, which uses the IP protocol to exchange data. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 21 Protocol (PPP), commonly used in dialup connections, with the Ethernet protocol or ATM protocol, which supports multiple users in a local area network. The PPP protocol information is encapsulated within an Ethernet frame or ATM frame. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 22: Status

    Current status of Network, DSL and Route Table. Packet System Status and Packet statistics for WAN port and LAN port. Statistics Route Default route and static route. Switch LAN Ethernet port status. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 23: Information

    Pair Number, DSL Firmware Version, System Current Time and System Update Time. G.SHDSL STATUS > G.SHDSL G.SHDSL STATUS page displays current status of DSL line including Channel Name, State, Annex, TCLayer, Line Rate, SNR, Loop Attenuation, TxPower and CRC. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 24: Networking

    NETWORKING STATUS page displays Network Status, DSL Status and Route Table information PACKET STATISTICS STATUS > Packet Statistics PACKET STATUS page displays System Status and packet statistics for WAN port and LAN port. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 25: Route

    ROUTE STATUS > Route Default route and static route SWITCH STATUS > Switch LAN Ethernet port status SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 26: Advanced Setup

    Note: The advanced functions are only for advanced users to setup advanced functions. The incorrect setting of advanced functions will affect the performance or result system error, even disconnection. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 27: Shdsl.bis

    Modulation Select the modulation supported by your ISP. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 28: Wan

    ADVANCED>WAN SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 29 Enter a gateway IP address provided by your ISP when select Static IP address Type. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 30: Lan

    Enter a subnet mask in dotted decimal notation when select Static IP address Type. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 31: Dns

    SHDSL.bis Router acts as DNS proxy. None: Select this option when you don’t want to configure DNS servers. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 32: Dhcp

    Enter IP address to change the static DHCP setting MAC Address Enter the MAC address of the Ethernet device. Static List The table displays IP addresses and MAC added to the Static DHCP list. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 33: Lan

    VID: (Virtual LAN ID) It is an definite number of ID range from 1 to 4094. PVID: (Port VID) It is an untagged member from 1 to 4094 of default VLAN. ADVANCED>VLAN SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 34 This field displays the ID number of the VLAN group Note: The LAN/WAN’s PVID need to belong to valid entry’s VID. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 35: Qos

    Enable Rate mode for Rate(kbps), Disable Rate for CBS(bytes) Rate(kbps) Assign Constant Bit Rate CBS(bytes) Assign Committed Burst Size Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 36: Pcp

    ADVANCED>QoS>PCP Item Description Class Setup which class by PCP value Click on Apply to save the parameters or Cancel to start configuring this page from beginning. DSCP ADVANCED>QoS>DSCP SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 37: Port

    DSCP+PCP: queue by DSCP value first, then queue by PCP value Default Class Define class, when packets match the above rule Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 38: Remark

    DSCP Remark Mode Enable/disable DSCP remark DSCP Setup which DSCP value is remarked to. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 39: Traffic Classify

    Traffic Classify Description Item Enable/disable this rule Enable Modify rule Modify Delete rule Delete Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 40 Traffic classify rule SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 41 SRC Port Max From 1 to 65535, this value should bigger than Port Min Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 42: Static Route

    WAN interface. If user wants gateway active, route interface must be Any WAN: route to WAN interface LAN: route to LAN interface Click Add to save the parameters changed or Back to return to previous page. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 43: Rip

    Enter the Corresponded Authentication Code for the Type picked above Split Horizon Enable or Disable Split Horizon feature Click Apply to save the parameters changed or Back to return to previous page. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 44: Nat/Dmz

    Assign IP address for the DMZ Host, if this field is empty, it means NO DMZ Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 45: Virtual Server

    Define port range, from 1~65535 Server IP Address Specify the IP address of the Service’s Hosting Server Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 46: Ddns

    Input the static IP address for the Host Name if IP Policy is selected with Specified IP Address option. Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 47: Firewall

    LAN to WAN, WAN to LAN, WAN to WAN Insert after rule Insert this rule after which rule, default is 0 Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 48 The same as Source Address/Address Type Application/Available applications Choice Protocol and port for firewall rule Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 49: Url Filter

    Select OFF to disable Content Filter, or ON to enable Content Filter feature Filter Config Item Description Mode Turning Off or On of the selected Filter condition Keyword Specify the desired keywords to be filtered with SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 50: Igmp

    Select from the drop down menu for desired IGMP modes: None: Don’t support any of the IGMP IGMP-v1: Support only version1 IGMP-v2: Support only version2 IGMP-v3: Support only version3 IGMP-all: Support all the available versions SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 51: Sntp

    Specify the date when daylight saving starts End Date Specify the date when daylight saving ends Click on Apply to save the parameters or Cancel to start configuring this page from beginning. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 52: Admin

    Enter desirable System/Host Name Domain Name Enter desirable Domain Name Enter desirable Authentication Timeout period in minutes Authentication Timeout Note: The character support [A-Z], [a-z], [0-9], [_(underline), -(dash), .(dot)] SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 53: User

    Normal: user can setup and read anything, but Admin session Guest: user only can read status Click on Apply to save the parameters or Cancel to start configuring this page from beginning. Management ADMIN>MGMT SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 54: Snmp

    Click on Apply to save the parameters or Cancel to start configuring this page from beginning. Click WWW to configure the parameters for remote management via WWW. Item Description SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 55: Telnet

    Click on the drop-down list and select ALL to allow the service or Disable WAN to disable the remote management service *Default: The SSH allow accessible from LAN side only. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 56: Utility

    The router can generate a syslog message and send it to a syslog server. You may click Refresh to renew the Sytem Log page or Clear Log to delete all log information. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 57: System Log Server Setting

    Load Factory Default settings. Click Backup to save config.cfg in your computer. To restore a previously saved config file from your computer. Click Browse to select the file and then click Upload. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 58: Upgrade

    Use RESTART to reboot the SHDSL.bis router. Click on Restart to reboot the system. LOG OUT Overview To logout the router, click on LOGOUT. A warning message will appear. Confirm by clicking on OK. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 59: Example

    Example LAN-to-LAN connection with bridge mode CO side SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 60: Cpe Side

    Setup Transfer mode, pair mode, Multiplexing, VPI/VCI as you want Click Apply. CPE Side Setup as following STU mode: STU-C WAN mode: Bridge LAN IP: 192.168.0.2 Be sure Transfer mode, pair mode, Multiplexing, VPI/VCI follow CO Click Apply. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 61: Lan-To-Lan Connection With Routing Mode

    LAN-to-LAN connection with routing mode CO Side Setup as following STU mode: STU-C WAN mode: Routing IP address type: Static WAN IP: 192.168.30.1 Netmask: 255.255.255.0 Gateway: 192.168.30.2 LAN IP: 192.168.20.1 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 62: Cpe Side

    STU mode: STU-R WAN mode: Routing IP address type: Static WAN IP: 192.168.30.2 Netmask: 255.255.255.0 Gateway: 192.168.30.1 LAN IP: 192.168.10.1 Setup Transfer mode, pair mode, Multiplexing, VPI/VCI follow CO Click Apply. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 63: Configuration Via Serial Console Or Telnet

    LAN LNK LED indicator on the front panel shall light if a correct cable is used. Starting your Telnet client with VT100 terminal emulation and connecting to the management IP of Router, wait for the login prompt appears. Input User and Password after login screen pop up, SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 64: Main Menu

    Reset and boot system. After you have completed all necessary reboot setting, make sure to apply the new configuration to NVRAM and reboot the system, otherwise, all of your changes will not take effect. quit Quit system. SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

  • Page 65: Key Cli Command Tree Overview

    Key CLI Command tree overview SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 66 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...
  • Page 67 SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7 – WWW.XENTINO.COM...

This manual is also suitable for:

Sr210Sr220Sr240

Table of Contents