Atag WS90274MC Instructions For Use Manual page 53

MAINTENANCE
Lighting
Active carbon filters:
The regenerable active carbon filter must be washed by hand with clear
water only, or in the dishwasher at a maximum temperature of 65 °C
without dishwasher detergent (the washing should be done without
any plates, dishes, cups, etc. in the machine). Do not use cleaning
products!
Remove the excess water without damaging the filter, remove the
holder and let the filter dry in the oven for at least 15 minutes at a
maximum temperature of 100 °C.
To keep the regenerable carbon filter efficient, this action should be
repeated every 2 months or when indicated by the filter indicator.
The filter must be replaced after no more than 3 years, or if it has
been damaged.
It is important that the grease filters and the regenerable active
carbon filter are thoroughly dry before repositioning.
Replacing the carbon filter:
The grease filters should first be removed before replacing the
carbon filter.
1. Open the filter access hatch.
2. Tilt the carbon filter downwards to remove it.
3. Repeat the steps above in reverse order, to replace the carbon filter.
Operation:
• Using a carbon filter creates more sound than when using the
cooker hood with an outlet.
• The carbon filter's operation is optimal at a lower motor speed.
You should, therefore, avoid using the boost function.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
EN 11