Settings; Introduction To Parameter Codes; Access To Parameters - Baxi SCB-17 User And Installation Manual

4 Settings

4.1 Introduction to parameter codes

First letter
CP010
Second letter
CP010
Number
CP010

4.2 Access to parameters

To access to SCB-17 parameters, it is possible to use the boiler control panel (refer to boiler instruction manuals ) or service
tool. Below some examples :
Control panel MK3
Press menu button and enable installer access selecting
•
the number, rotate the knob and push the confirmation button.
Select the zone to be modified (tile in the main screen)
•
Select the parameter zone to change, then scroll down the zone setup menu till the voice
•
signals"
and push the confirmation button.
In alternative it is possible to search the single parameter pushing the menu button →
datapoint"
. Write the friendly name and press enter.
The control panel shows all possible parameters with the same name. They can be more than one because of different
devices connected.
The controls platform makes use of an advanced system to
categorise parameters, measurements and counters. Knowing the
logic behind these codes, makes it easier to identify them. The code
consists of two letters and three numbers.
The first letter is the category the code relates to.
A Appliance: Appliance
C Circuit: Zone
The second letter is the type.
P Parameter: Parameters
C Counter: Counters
M Measurement: Signals
The number is always three digits. In certain cases, the last of the
three digits relates to a zone.
"installer access"
and entering the code 0012. To change
12
"Parameters, counters,
"Installation setup" "Search
→