Related Manuals for Xtreme XPD-IT6KW
Summary of Contents for Xtreme XPD-IT6KW
- Page 1 XPD-IT6KW & IT10KW User & Installation Manual www.xpcc.com | © 2022 Xtreme Power Conversion Corporation. All rights reserved. (Rev 3/8/22)
-
Page 2: Table Of Contents
XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply Table of Contents Important Safety Instructions...............3 Product Overview..................4 Installation and Setup.................5 Receiving Inspection..................5 Obtaining Service..................10 Xtreme Power Conversion Limited Warranty..........11 Xtreme Power Conversion Corporation Page 2... -
Page 3: Important Safety Instructions
XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply 1. Important Safety Instructions Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly and read carefully the following instructions before installing the unit. Do not operate this unit before reading through all safety information and operating instructions carefully. -
Page 4: Product Overview
XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply 2. Product Overview • NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep the original package in a safe place for future use. -
Page 5: Installation And Setup
XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply Installation and Setup Unpacking & Inspection Remove the Transformer box from the packing. Note: The Transformer box is very heavy, be cautious when unpacking and lifting the unit to avoid injury. 2. Check the inside package... - Page 6 XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply Selecting Installation Position It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the Transformer box and extend the life of the Transformer box. Please follow the...
- Page 7 XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply Terminal block wiring diagram of TRANSFORMER BOX Connecting with UPS Output of the UPS should be connected to the input of transformer box and the output of transformer box is the final output of system.
- Page 8 XPD-IT6kW & IT10kW User’s Manual Uninterruptible Power Supply Confirm the UPS output voltage through the front panel and verify that it matches the transformer box output voltage. For example, if the input to UPS is 208V, then voltage selection should be 208V.
-
Page 9: Obtaining Service
2. Verify there are no circuit breakers tripped. 3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at support@xpcc.com. -
Page 10: Xtreme Power Conversion Limited Warranty
Any technical advice furnished by XPC Corporation or a XPC Corpora- tion authorized representative before or after delivery with regard to the use or application of Xtreme Power Con- version equipment is furnished on the basis that it represents XPC Corporations best judgment under the situation and circumstances, but it is used at the recipient’s sole risk.