Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FOVNO RS-H1B
Summary of Contents for FOVNO RS-H1B
- Page 1 FOVNO 手 动 倒 立 吸 盘 车 顶 架 说 明 书 Manual Inverted Sucker Bike Rack Instructions...
- Page 2 Introduction Learn about your new Manual Inverted Sucker Bike Rack Handlebar clamp Handlebar strap Safety strap Cylinder rod Suction foot Handelbar suction foot Saddle strap Saddle holder Safety suction foot Saddle suction foot Handelbar suction foot Strap buckle...
-
Page 3: What's In The Box
Due to transportation regulations, the maintenance oil may be taken out of the packaging, please buy silicone oil at the local market or bike shop, If you cannot buy silicone oil, you can temporarily replace it with edible oil. Specification Model Number RS-H1B Package Size 370×160×140mm System Weight 2.3kg... - Page 4 Instructions The handlebar suction foot installation Install handlebar Remove the handlebar Press button Penetrate Pull apart Shake Tighten the handlebar Lock the handlebar Release handlebar Remove handlebar...
- Page 5 Instructions The safety suction foot installation After putting the bike upside down on roof of the car, be sure to install the safety suction foot. The binding position of the safety suction foot is shown in Figure Ⅰ. Install the safety suction foot under the bike aheadset stem , and the safety strap must pass between the bike down tube and the fork before tying up.
- Page 6 Instructions The saddle suction foot installation Binding behind the seatpost Select the mounting holes according to the actual situation Suction foot adsorption and removal: 1. Before installation, clean the installation position and suction foot to avoid dust affecting the sealing, or water accumulation causing the suction foot to be slippery. 2.
-
Page 7: Installation Method
Instructions Installation method 1 1. Install the handlebar suction feet and saddle suction foot on the bike, fasten the straps, and the bottom of all suction feet are horizontally upward, and the cylinder rod is facing the rear of the bike, as shown in Figure 4. 2. - Page 8 Instructions Installation method 2 1. Open the handlebar suction feet and place them in the selected position as shown in Figure VI. The distance between the two is determined by the length of each side of the bike handlebar. 2. Attach the saddle suction foot to the bike saddle and fasten the straps, making sure that the strap is tied behind the seat tube. 3.
-
Page 9: Precautions And Maintenance
Precautions and Maintenance Precautions 1. Place cylinder rod toward the rear of the car to avoid the wind and dust entering into the cylinder rod. 2. Before driving,check the handlebar suction feet and saddle suction foot are tight with bike and car,And whether the safety suction foot strap is fastened. 3. -
Page 10: Troubleshooting Method
Trouble Shooting Problem Possible lssue Troubleshooting method Solution Add maintenance oil to the cylinder or Pull out the cylinder rod to check the condition of the front end Lack of maintenance oil in the front end of the cylinder rod. If there of the cylinder rod. -
Page 11: Warranty Period
Warranty The after-sales service of this product is strictly in accordance with the "Regulations on the Protection of Consumer Rights and Interests of the People's Republic of China", and the " Product Quality Law of the People's Republic of China" is implemented to implement after-sales three-guarantee services. The service contents are as follows: Warranty Period 1. - Page 12 YouTube 新浪微博 微信公众号 WeChat Official Accounts Instagram 服务网址/Service Website : www.fovno.com 公 司 名 称 : 义乌市风动科技有限公司 Company name : YI Wu Feng Dong Technique LTD 地 址 : 浙江省金华市义乌市义亭镇稠义西路168号 Address : No.168, Chouyi West Road, Yiting Town, Yiwu City, Jinhua City, Zhejiang Province...
Need help?
Do you have a question about the RS-H1B and is the answer not in the manual?
Questions and answers