Advertisement
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
Macarth
Macarthy
Wicker Pet Scratch Pole
ITEM CODE:76147
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JWA Macarthy 76147
Summary of Contents for JWA Macarthy 76147
- Page 1 Macarth Wicker Pet Scratch Pole ITEM CODE:76147 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION PRE-ASSEMBLY PREPARATION Before you start : Before you start : 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when li ing. Product should be assembled as near as possible to the point of use 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instruc ons carefully before beginning assembly.
- Page 3 1. Cat cubby 3. Top board 2. Bottom board 4. Hanging pom pom P1. Long sisal pole P2. Plush pole P3. Short sisal pole 3pcs 3pcs M8*35,8pcs M8*35,8pcs M8*70,1pc M8*70,1pc M8,1pc M8,1pc M6,1pc M6,1pc...
- Page 4 Step 1 You will need P3. Short sisal pole P2. Plush pole 2. Bottom board 2 p c s M8*35, 3 pcs Attach short sisal pole (P3), plush pole (P2) to bottom board ( 2) by using screw (A). Insert all screws before fully tightening. Tighten with allen key (C).
- Page 5 Step 2 You will need 4. Hanging pom pom P1. Long sisal pole 3. Top board P2. Plush pole M8*35,3pcs M8*35,3pcs M8*70,1pc M8*70,1pc Insert screw (B) into short sisal pole (P3) and tighten. Place hanging pom pom (4) on top. Screw long sisal pole (P1) into screw (B) by rotating part until tight.
- Page 6 Step 3 You will need 1. Cat cubby M8*35,2pcs M6,1pc M6,1pc Attach cat cubby ( 1) to plush pole (P2) and long sisal pole (P1) using screw (A) Tighten with allen key (C). Screw part (D) into top board (3) from underneath.
- Page 7 ASSEMBLY IS COMPLETE...
- Page 8 PRODUCT CARE SPOT CLEANING: Dot not rub. Do not spot clean with solvent. Treat spills and stains as soon as possible. Gently scrap off any soil or blot any liquid from the surface of the fabric before applying cleaner. Apply proprietary cleaning agents strictly according to instructions to remove the residue of the spill.
Need help?
Do you have a question about the Macarthy 76147 and is the answer not in the manual?
Questions and answers