Download Print this page

AtGames HAA310 Instruction Manual

INSTRUCTION MANUAL FOR TRACKBALL HAA310

Tools Needed

Tools Needed:

Package includes:

(for ALU 1.0 version)

Trackball Rim

A Phillips-head Screwdriver.

Blue Cable

#SA Screw x 3

Trackball

Red Cable

(for ALU 1.1 version and Quadplay)

#SB Screw x 4

Trackball Case

P.1

P.2

P.5

Table of Contents

Do you have a question about the HAA310 and is the answer not in the manual?

Page 1 Blue Cable Red Cable (for ALU 1.0 version) (for ALU 1.1 version and Quadplay) #SA Screw x 3 #SB Screw x 4 Trackball Rim Trackball Trackball Case Images and instructions are for reference only and subject to change. © 2022 AtGames.
Page 2 Carefully hold the trackball ball and rim from Prepare a new trackball. underneath the control panel to avoid damaging it as you remove the 7 screws indicated. Images and instructions are for reference only and subject to change. © 2022 AtGames.
Page 3 Using the 8 screws removed in step 2, fasten them, circled in yellow, and assemble the control panel circled in yellow, to secure the control panel case. case to its original state. Images and instructions are for reference only and subject to change. © 2022 AtGames.
Page 4 HOW TO INSTALL TRACKBALL ONTO ALU Step 13 Reinstall the control panel remembering to attach all the connecting cables, and secure with screws removed in step 1. Images and instructions are for reference only and subject to change. © 2022 AtGames.
Page 5 Place the new trackball ball into the control panel using the rim to hold the ball in place. Images and instructions are for reference only and subject to change. © 2022 AtGames.
Page 6 Using the 8 screws removed in Step 1, fasten them casing removed from Step 2. to secure the QuadPlay control panel case and attach the 8 removed covers. Images and instructions are for reference only and subject to change. © 2022 AtGames.