Table of Contents
Advertisement
6.
Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the
equipment to the power inlet.
7.
Place the power cord in a way that people are unlikely to step on it. Do
not place anything on the power cord.
8.
Always unplug the power cord before inserting any add-on card or module.
9.
All cautions and warnings on the equipment should be noted.
10. If any of the following situations arises, get the equipment checked by a
service personnel:
w
The power cord or plug is damaged.
w
Liquid has penetrated into the equipment.
w
The equipment has been exposed to moisture.
w
The equipment has not worked well or you can not get it work
according to User's Manual.
w
The equipment was dropped and damaged.
w
The equipment has obvious signs of breakage.
11. Never pour any liquid into the opening that could damage the equipment or
cause an electrical shock.
12. Do not leave the equipment in an unconditioned environment with a
storage temperature of 60
equipment.
13. To prevent explosion caused by improper battery replacement, use the
same or equivalent type of battery recommended by the manufacturer only.
O
O
C (140
F) or above, which may damage the
VII
Preface
Advertisement
Table of Contents
