Table of Contents
Advertisement
Quick Links
White & Light Wood Electric Desk
Instruction Manual
SKU: DESK-E144WC
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e144bn
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo DESK-E144WC
Summary of Contents for Vivo DESK-E144WC
- Page 1 White & Light Wood Electric Desk Instruction Manual SKU: DESK-E144WC Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-e144bn GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 154lbs Phillips Failure to do so may result in serious injury. Screwdriver (70kg) ASSEMBLY STEPS STEP 1 Attach Left Crossbar (B) to Leg (H) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B). Connect Right Crossbar (C) to Motorized Leg (I) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
- Page 4 STEP 3 Attach Foot (E) to Leg (H) and Motorized Leg (I) using M6x35mm Screws (S-C) and 5mm Allen Wrench (T-B). STEP 4 Use Connecting Bracket (G) to join leg assemblies together by securing it over Left Crossbar (B) and Right Crossbar (C) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
- Page 5 STEP 5 Loosen the knob on the Sync Rod (F) and extend the hex shaft. Insert hex shaft into the Leg (H), making sure the metal retaining ring makes contact with the Leg (H). While holding the hex shaft with one hand, extend Sync Rod (F) onto the spline shaft of Motorized Leg (I).
- Page 6 STEP 6 (Continued) Secure desktop assembly using Rectangle and Square Connectors (O, P), M5x16mm Screws (S-B), and a Phillips screwdriver. STEP 7 Flip frame assembly over and secure to assembled Desktop (A) using M5x16mm Screws (S-B) and a Phillips screwdriver. Screws will be installed into Side Brackets (D) and Connecting Bracket (G). Attach Headphone Hook (N) and Controller (J) to Desktop (A) using M6x16mm Screws (S-C)and a Phillips screwdriver.
- Page 7 STEP 8 Connect cable from Motorized Leg (I) to Control Panel (J), as shown below. Connect AC Adapter (K) to Control Panel (J). Secure cables to Desktop (A) using Cable Clips (L). CAUTION! Do not exceed desk Keep area of vertical Keep weight on desk Leave enough slack in weight limit.
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-E144WC and is the answer not in the manual?
Questions and answers