MSI CR640 User Manual page 95

4-10
The Password Check item is used to specify the type of BIOS password
protection that is implemented. Settings are described below:
The password is required only when users try to access to
Setup
BIOS SETUP UTILITY.
The password is required every time when the Notebook is
powered on or when users try to access to BIOS SETUP
Always
UTILITY.
To clear a set Administrator Password/ User Password, just press [Enter]
under Administrator Password/ User Password field when prompted to
enter the password. Please note that when Administrator Password has
been cleared, User Password will be cleared as well. A message box
pops up confirming password will be disabled. Once the password is
disabled, users can enter the BIOS Setup menu without entering password
when the system is rebooted.