Table of Contents
Advertisement
EPG:
Press
/
►
to enter the Program Guide menu.
OK
Favorite:
Setup favorite channel list.
Channel Diagnostic:
Press
/
►
to display some signal information
OK
on current digital channel, such as signal strength,
Frequency, etc.
Channel Organizer:
This option allows you to organize channels.
System
Picture
HDMI CEC Settings
HDMI Signal Format
Sound
Sleep Timer
Idle TV Standby
Channel
TV Placement
Environment
System
Shop Mode
Settings
Software Update
HDMI CEC Settings:
CEC control: To select on or off.
Device Auto Power Off: To select on or off.
TV Auto Power On: To select on or off.
CEC Device List: Turn devices on and select [Enable] to
enable control of HDMI devices.
HDMI Signal Format:
Sleep Timer:
To select 15min,30min,45min,60min,90min,
120min or off.
Idle TV Standby:
To select After 1 hour of inactivity, After
2 hour of inactivity,After 4 hour of inactivity,After 24 hour
of inactivity or off.
TV Placement:
To select Desktop and Wallmount.
Environment:
To select Home and Shop.
Shop Mode:
To select E-Sticker.
Settings:
1.Lock: Click and lock the TV.
2.Power: Turn the Wake On Network and Network
Standby on or off.
3.Recording Storage: Put the storage device and record
the storage files.
4.OSS License: The content about oss license.
Software update:
To select off,once and Always.
(This function is only for OAD)
The input
Press
then press
desired source, and then press OK to confirm.
Off
Off
Desktop
Home
To select HDMI 1.4 / HDMI 2.0.
to select your
ATV
CABLE
ANTENNA
AV
HDMI 1
HDMI 2
HDMI 3
Android TV Home
Channels setup
Channels setup
Analogue setup:
Select ATV and enter.
- Analogue Auto Tuning: Press OK to start the automatic
search process. The search may take a few minutes.
- Analogue Manual Tuning: Press OK to enter the
interface.
Press
to set program, Audio system or color system
▲/▼
item, then Press
▲/▼
select frequency and press OK to
search channel.
- Teletext Setup: Press OK and then use
preferred teletext.
Digital Cable Tuning:
Auto tuning: Press OK to start the automatic
search process. The search may take a few minutes.
During the process, you can press Back and choose
YES to exit .
Manual Tune: Select the channel number and start to scan
LCN: Select on or off.
Auto service Update: Select on or off.
Digital Antenna Tuning:
Auto Scan: Press OK to start the automatic
search process. The search may take a few minutes.
During the process, you can press Back and choose
YES to exit .
Manual Scan: Select the channel number and start to scan
Press MENU button, then select Channel and press OK to
enter Digital Channel setup, press OK to select Subtitle
Setup.
Subbtitle Setup:
(1)Subtitle Setting:Include off,Basic,Hearing impaired.
(2)Primary Preferred Language:Press OK and then use
▲/▼ to select Primary Preferred Language.
(3)Secondary Preferred Language:Press OK and then use
▲/▼ to select Sencond Preferred Language.
(ATV, CABLE and Antenna )
(ATV, CABLE and Antenna )
▲/▼
to select
Select Cable and enter.
Select Antenna and enter.
15
Advertisement
Table of Contents
