Subscribe to Our Youtube Channel
Related Manuals for WINDY NATION BAT-LFP12-100
Summary of Contents for WINDY NATION BAT-LFP12-100
- Page 1 BattaMax Lithium User Manual Revision 1.0 windynation BattaMax Lithium Lithium Iron Phosphate (LiFePO4) – Deep Cycle SMART Battery BAT-LFP12-100 User’s Manual Page 1 of 14 11/14/2022 windynation...
-
Page 2: Table Of Contents
BattaMax Lithium User Manual Revision 1.0 Table of Contents Introduction ..............................3 Safety ..............................3 Definitions ..............................3 Product Overview ............................3 Features ..............................4 Applications ............................. 4 Specifications ............................4 2.3.1 Electrical Specifications ........................4 2.3.2 Physical Specifications ........................4 Installation .............................. -
Page 3: Introduction
1.1 S AFETY Windy Nation Inc. (“Windy Nation”) is not assembling or installing the product and therefore Windy Nation, its directors, officers, and employees disclaim that by purchasing a Windy Nation product you accept all liability and responsibility for damage to property, injury, or death arising out of or related to the use or misuse of any product offered by Windy Nation. -
Page 4: Features
Marine & RV house power Electric Vehicles Medical Equipment 2.3 S PECIFICATIONS 2.3.1 Electrical Specifications Parameter BAT-LFP12-100 Nominal Voltage 12.8V (4x 3.2V cells) Nominal Capacity (25 100 Ah Internal Resistance <150mΩ Cycle Life >2000 @1C 100% DOD Max Discharge Current 100A Continuous (300A <3s Pulse) -
Page 5: Environment
BattaMax Lithium User Manual Revision 1.0 Caution: Risk of fire, explosion, or burns. Do not disassemble, heat above 70°C (160°F) or incinerate. 3.1 E NVIRONMENT Batteries should be installed in a clean, dry area, keeping water, oil, and dirt away from the batteries. The accumulation of these materials on the batteries can result in self-discharge and possible short-circuits. -
Page 6: Configuration
BattaMax Lithium User Manual Revision 1.0 3.2.2.1 Terminal Protection Corrosion can build up on terminals if they are not kept clean and dry. To prevent corrosion, apply a thin coat of terminal protector spray that can be purchased through your local automotive parts dealer. The battery terminals must be inspected prior to each use for corrosion and loose connections. -
Page 7: Series-Parallel Connection
BattaMax Lithium User Manual Revision 1.0 3.3.3 Series-Parallel Connection A Series-Parallel connection will increase the system capacity (Ah) as well as increase the system voltage. For example, if four 12V batteries with 100Ah of capacity are wired in series-parallel, the resulting battery bank will be 24V of 200Ah. -
Page 8: Temperature Compensation
BattaMax Lithium User Manual Revision 1.0 4.1.3 Temperature Compensation The BattaMax has internal temperature sensors that can be monitored and configured to prevent charging and/ or discharging at extremely low or high temperatures. Many charge controllers offer a Battery Temperature Sensor (BTS) that automatically adjusts the charging parameters based on the measured battery temperature. -
Page 9: Battery Management System (Bms)
BattaMax Lithium User Manual Revision 1.0 protector spray to each battery terminal. Confirm the battery is completely dry before attaching electrical connections. 4. Periodically check the battery’s state of charge. Lithium batteries will slowly self-discharge when not in use or whilst in storage. 5 BATTERY MANAGEMENT SYSTEM (BMS) BattaMax batteries contain a Battery Management System (BMS) that provides the ability to monitor your battery status via a Bluetooth Smartphone app and protect the battery cells from excessive high and low... -
Page 10: Android
BattaMax Lithium User Manual Revision 1.0 5.1.1.1 Pro Version To access the configuration screens of the application, the purchase of the Pro version of the application is required. Once purchased the config button becomes active and can be clicked to open any of the five configuration pages located at the bottom of the config screen: Page Description... -
Page 11: Balancer Configuration
BattaMax Lithium User Manual Revision 1.0 Cell 20% Cap. Voltage 3200 5.2.3 Balancer Configuration Parameter Description Units Value Start Voltage Cell Voltage when balancing begins 3500 Delta to Balance Balance does not occur until delta level is reached Balancer Enabled Turns Balancer on or off On/Off Enabled... -
Page 12: Temperature Effects On Storage
For any concerns, please refer to the Rechargeable Battery Recycling Corporation (www.rbrc.org). Windy Nation supports a clean environment, and we hope that you will do the same. 7 TESTING AND SUPPORT These battery testing procedures are guidelines only for identifying a battery that may need to be replaced. -
Page 13: Testing: Open Circuit Voltage
7.5.1 Restrictions No warranty will apply if the Product (i) has been altered or modified except by Windy Nation; (ii) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Windy Nation; (iii) has been subjected to abnormal physical, thermal or electrical stress, misuse, negligence, or accident. If Windy Nation determines that the problem with the Product is not due to a manufacturing defect in Windy Nation’s... -
Page 14: Disclaimer
Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. Neither Windy Nation nor its affiliates or suppliers will be held liable or responsible for any damage or loss to any items or products connected to, powered by or otherwise attached to the Product. The total cumulative liability to Customer, from all causes of action and all theories of liability, will be limited to and will not exceed the purchase price of the Product paid by Customer.
Need help?
Do you have a question about the BAT-LFP12-100 and is the answer not in the manual?
Questions and answers