Initial Operation; Reception Of The Radio Signal - La Crosse Technology WS6204 User Manual

Initial operation:

 Open the Weather Station battery compartment cover
 Insert 2 x AA batteries observing polarity [ "+" and " –" marks]
 When you insert the batteries, all icons on the LCD will light up for 3 seconds, and you will hear a beep tone,
then detect indoor temperature & humidity.
 Insert the output terminal of the adapter into the AC power socket
then insert the adapter into the AC socket, the backlight of the product will always be lit.
 Open sensors battery compartment cover and insert 2 x AA batteries in each observing polarity [ "+" and
" –" marks]
 The Weather Station will now start to make a connection to the outdoor remote sensor. This process lasts for
a maximum of 3 minutes and will displayed by a flashing reception antenna symbol
display area on the receiver.
 This now, Open the remote Sensor battery compartment cover, push the channel switch to the "1" position,
Insert 2 x AA batteries observing polarity ["+" and "–" marks], close the battery cover.
 According to the same method, push the channel switch to the "2" or "3" position, establish another 2 remote
sensor connections.
 After receiver has created 3 remote sensor connections, it will enter the Radio control receive mode.

Reception of the Radio signal:

 The clock will automatically search the DCF signal after 3 minutes of any restart or changing of new fresh
batteries. The radio mast icon starts to flash.
 At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure with the DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio
mast icon disappears from the display), the system will automatically attempt another synchronization at the
next full one hour. This procedure is repeated automatically up to total 5 times.
 To start manual DCF signal reception, press and hold the "-" button for 3 seconds. If no signals received
within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start again at the
next full one hour.
 During RC reception，to stop searching radio signal, press the "-" button once.
F.Y.I.:
 A flashing radio mast icon indicates that the DCF signal reception has started
 A continuously displayed radio mast icon indicates that the DCF signal was received successfully
 We recommend the product be placed at a minimum distance of 2.5 meters (8.2Feet) to all sources of
interference, such as televisions or computer monitors
 When receiving the DCF radio wave, it will automatically turn off the backlight.
 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
 During the RC receive mode, only the "
functional, If you want to carry out other functions of operation, please press "-" button to exit the
EM3383D_DCF User Manuals
LUM / SNZ
○
or switching power adapter.
" and "-" buttons have a function, other buttons are not
,8 on the back of the product,
in the "OUTDOOR"