Advertisement
1.Installing the Hook
Mark your selected place of
1.1
installation. (Figure 1)
Remove the pencil spindle from
1.2
the hook by loosening the grub screw.
(Figure 2)
Drill appropriate sized pilot
1.3
hole for the wood screw at your
selected install point.
1.4
Fit pencil spindle using wood
screw provided. (Figure 3)
Place hook on pencil spindle and
1.5
tighten the grub screw to secure.
IMPORTANT:
Please install this hardware in the
following order to ensure its warranty
is not voided.
1.
Install the hardware on raw/
unfinished door using the
instructions provided.
2.
Remove hardware (where possible) and
store safely. Do not place tape onto
the hardware as this will damage the
finish.
3.
Paint / finish door.
4.
Reinstall hardware.
Included
2. Pencil Spindle
3.Grub
Screw
1. Hook
4. Wood Screw
Figure 1
Not Included
5. Allen Key
Figure 2
(3)
Figure 3
(2)
Advertisement
