TABLE OF CONTENTS in a well ventilated area, and work with approved safety 1. SAFETY INSTRUCTIONS equipment, such as those 2. COMPONENT LIST dust masks that are specially 3. TECHINCAL DATA designed to filter out micro- 4. INTENDED USE scopic particle. 5.
Page 6
and knowledge, unless connected to more than they have been given one source of energy; supervision or instruction 3.Do not store explosive concerning use of the substances such as appliance by a person aerosol cans with a responsible for their safety. flammable propellant in 2.Children aged from 8 years this appliance.
Page 7
refrigerator, so that it is not they are of the type in contact with or drip onto recommended by the other food. manufacturer. –If the refrigerating appliance When the power cord is left empty for long or socket is damaged, periods, switch off, defrost, or any other electrical clean, dry, and leave the...
Page 8
19. Do not allow children or automobile battery the persons with physical capacity gets small, use disability to operate the appliance with the without any guidance or engine running. After using supervision. the appliance, unplug the 20.Do not place the appliance cigarette lighter socket to next to a high-temperature prevent the loading on the...
Page 9
Recharge only with the with the skin or eyes. If charger specified by Worx. contact has been made, Do not use any charger wash the affected area with other than that specifically...
was intended. Li-Ion battery. This product has been q) Remove the battery pack marked with a symbol relating to ‘separate collection’ for all battery from the equipment when packs and battery pack. It will then Li-I on be recycled or dismantled in order not in use.
Connect the cooler to the DC/AC power Power Supply supply to charge the batteries. You can Fig. A also charge the batteries with a Worx Pow- erShare Charger (sold separately.) Machine Weight 29.8lbs (13.5 kg) (Bare tool) Note: 1.The batteries will charge quicker if the cooler...
INPUT DC 12V DC 24V Setting the Temperature CUT IN CUT IN Note: Batteries must be installed or cooler connected to power source to change settings 8.5V 10.9V 21.3V 22.7V 10.1V 11.4V 22.3V 23.7V Reset Temperature Turn the cooler OFF, then press the Cool- 11.1V 12.4V 24.3V...
2. Empty the storage box and use a dry cloth to wipe the excess water from the cooler; 3. Put the cooler in a dry place and keep the lid sightly open to avoid odors. 4. Recommended storage environment:ambient temperature: 77°F/ 25°C, ambient humidity:75%. 8.
9. TOUBLESHOOTING Problem Reasons/Suggestions Cooler does not work 1. Check if the ON/OFF switch is on; 2. Check if connected to a power source or batteries are installed; 3. Check if the fuse is burnt; 4. Ensure power supply is functioning correctly; 5.
Page 15
Code FA shown Possible reasons: Compressor module failure Contact manufacturer for help. Code Fb shown Possible reasons: Compressor module failure Contact manufacturer for help. Code FC shown Possible reasons:Low battery voltage or faulty battery pack Please use the battery pack after charging. If you can- not solve the problem, please contact manufacturer for help Code C1 shown...
Need help?
Do you have a question about the WX876L and is the answer not in the manual?
Questions and answers
How many degrees below ambient does this cooler cool to?
The cooling temperature range of the Worx WX876L cooler is from -4℉ to 68℉.
This answer is automatically generated