Table of Contents
Advertisement
Tool-free adjustable stem for
T250 & T350 models
This stem allows a better clea-
rance when user is getting on
and off the tricycle. A simple
knob makes it easy to change
the handlebars' position (see
picture below).
To adjust position, push the
button upwards, then lift small
lever completely. Adjust angle of
stem and handlebars as required.
Handlebars for Maya, Zoulou,
Inca, Azteca models
You can adjust these handlebars
vertically. To do so, you'll need
either a 5mm or 6mm Allen
wrench.
Untighten the screw. Adjust to
desired height, and tighten the
screw back.
Do not over tighten the
screw, you could damage
the locking ring.
10
Advertisement
Table of Contents
